Manual

9
REMOTE CONTROL BATTERY
The remote control requires one “button-type” 3-volt lithium
battery, included. To extend the life of the original battery
we have inserted a small clear plastic spacer tab between
the lithium battery and the battery terminal.
You must remove this battery spacer tab before you can
use the remote control.
To remove the tab, pull it in the direction of the arrow in the
illustration as shown.
When the operation of the remote control becomes intermittent or unsatisfactory,
replace the original battery with a new 3-volt lithium battery.
1.) Press the locking lid of the battery holder to the left and slide out the battery
holder.
2.) Place one 3V CR2032 battery in the battery holder, observing the positive (+)
direction. If the battery is placed incorrectly the remote control will not work.
3.) Insert the battery holder into the battery slot.
Notes: Use a well-known brand of cell battery for longest life and best
performance. When the remote operation becomes intermittent, replace the
battery.
1
2
3
4
Remove
before use
Remueva
antes de
usar
ES25_072904.p65 30/7/2004, 11:349