User guide

38
Playing MP3 Audio Files On Portable “USB” Storage Device
Note: The USB port in this system can only read files in MP3 format. It cannot
read files in other compressed audio formats such as WMA, AAC, etc.
1.) Turn the system ‘On’ as usual.
2.) Press the FUNCTION button repeatedly until the main
display shows "CARD – USB".
3.) Connect your portable USB storage device
to the USB Port on the front panel of
this system as shown in the illustration.
Note: The portable USB drive can only be
connected one way, usually with the
printed side facing up. If you have trouble
connecting your USB storage device to the
USB port, do not force it. This may
damage the connector. Instead turn the
device over and try connecting it again.
4.) The player will read the information on the external
device and the display will show the total number of
“Tracks” and “Albums” on the device.
5.) Press the PLAY/PAUSE button to begin playback.
• Adjust the VOLUME, EQ, and DBBS controls as desired.
• You can skip tracks with the SKIP TUNING "+" or "–" buttons just as you would
with a normal CD.
• You can skip albums with the ALBUM/MEM.CH "+" or "–" buttons.
• You may press the MODE button once to enter “Album
Search” mode, then press the SKIP TUNING "+" or
"–" buttons to search the desired album.
Note: If the album name is not recognized, or if the album was not properly
named, the display will show “UNKNOWN”.
6.) Playback will continue until the last track has played and then the display will
again show the total number of tracks, albums on the USB device.
Note: If you have finished listening and want to remove your USB device before
the music ends, always press the STOP button first and then remove your
device. If you remove the device before pressing the STOP button you may
cause an electro-static discharge (ESD) condition and this may prevent the
device from operating properly until the ESD condition is cleared.
ES299_062905.p65 29/6/2005, 15:0738