Specifications

SAG582136600 System Application Guide
Issue W, January 12, 2015 Spec. No. 582136600 (Model 211
NGFB)
Page 94 of 109
This document is property of Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy
Systems, North America, Inc. Any copying, use, or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.
Home
Load distribution (GMT fuses) and load return leads are connected to receptacles
located inside the Distribution Unit. Load leads are brought into the right side (as
viewed from the front) of the shelf and are accessible from the front of the shelf.
1.3.4 Alarm and Monitoring Connections: Customer wiring cables are available.
(A) List 1 and 2: Relay output and digital input leads are connected to screw-type terminal
blocks located on the SCU+ or NCU located inside the shelf. These leads enter the rear of
the shelf.
(B) Lists 5 and 6: Relay output and digital input leads are connected to screw-type terminal
blocks located on the Customer Interface Board located inside the shelf. These leads
enter the right side (as viewed from the front) of the shelf and are accessible from the front
of the shelf.
1.3.5 Dimensions and Weights: Refer to the PHYSICAL SIZE INFORMATION section of this
document.
2. RECTIFIER
Refer to the Rectifier Instructions (UM1R481000).
3. CONTROLLER
Refer to the Controller Instructions (UM1M521BNA or UM1M820BNA or UM1M830BNA).
For controller factory settings, refer to the Controller Configuration Drawing (C-drawing).