Installation guide

ManualsBrandsEmerson ManualsOther1098-EGR

D100339XUS2

Installation Guide

English – July 2011

Types 1098-EGR and 1098H-EGR



product sizes categories

DN 25 / NPS 1 SEP

DN 50, 80, 100, 150, 200 x 150, 300 x 150 /

NPS 1, 2, 3, 4, 6, 8 x 6, 12 x 6



This installation guide provides instructions for

installation, startup, and adjustment. To receive a copy

of the instruction manual, contact your local Sales Ofce

or view a copy at www.sherregulators.com. For further

information refer to: Types 1098-EGR and 1098H-EGR

Instruction Manual, form 5084, D100339X012.



This product may be used as a safety accessory with

pressure equipment in the following Pressure Equipment

Directive 97/23/EC categories. It may also be used

outside of the Pressure Equipment Directive using sound

engineering practice (SEP) per table below.





See Table 1



(1)

27,6 bar / 400 psig or body rating limit whichever

is lower.



(1)

41,4 bar / 600 psig



(1)

See Table 2



(1)

See Table 3



(1)

See Table 4



(1)

 -20° to 180°F / -29° to 82°C

 0° to 300°F / -18° to 149°C,

except water is limited to 0° to 200°F / -18° to 93°C

 -20° to 275°F / -29° to 135°C

1. The pressure/temperature limits in this installation guide and any applicable standard or code limitation should not be exceeded.





























































Clean out all pipelines before installation of the regulator

and check to be sure the regulator has not been damaged

or has collected foreign material during shipping. For

NPT bodies, apply pipe compound to the external pipe

threads. For anged bodies, use suitable line gaskets

and approved piping and bolting practices. Install the

regulator in any position desired, unless otherwise

specied, but be sure ow through the body is in the

direction indicated by the arrow on the body.









Warning

Table 1. Body Sizes and End Connection Styles

BodY sizes

cast iron steeL or stainLess steeL

dn nps

25, 50 1, 2 NPT, CL125 FF, or CL250 RF

NPT, CL150 RF, CL300 RF,

CL600 RF, BWE, SWE, or PN 16/25/40

80, 100, 150 3, 4, 6 CL125 FF or CL250 RF

CL150 RF, CL300 RF, CL600 RF,

BWE, or PN 16/25/40

200 x 150, 300 x 150 8 x 6, 12 x 6 - - - -

CL150 RF, CL300 RF, CL600 RF,

or BWE

Summary of content (8 pages)

PAGE 1
Types 1098-EGR and 1098H-EGR Installation Guide English – July 2011 Introduction Installation This installation guide provides instructions for installation, startup, and adjustment. To receive a copy of the instruction manual, contact your local Sales Office or view a copy at www.fisherregulators.com. For further information refer to: Types 1098-EGR and 1098H-EGR Instruction Manual, form 5084, D100339X012. Only qualified personnel should install or service a regulator.
PAGE 2
Types 1098-EGR and 1098H-EGR Table 2. Outlet Pressure Ranges pilot types 6351 6352 6353 6354L(1) 6354M(2) 6354H 61L 61LD 61LE 61H 61HP Y600AM Table 3. Actuator Sizes and Maximum Pressures outlet (control) pressure range bar psig 0,21 to 1,38 3 to 20 0,34 to 2,41 5 to 35 2,41 to 6,90 35 to 100 35 mbar to 0,14 bar 14-inches w.c. to 2 psig 0,14 to 0,69 2 to 10 0,21 to 2,76 3 to 40 2,41 to 8,62 35 to 125 5,86 to 13,8 85 to 200 12,1 to 15,2 175 to 220 13,8 to 20,7 200 to 300 0,02 to 0,14 0.
PAGE 3
Types 1098-EGR and 1098H-EGR 21 27 19 10 18 INDICATOR PLUG ASSEMBLY 37 22 7 8 21 35 6 36 3 5 2 31 24 4 26 20 14 23 15 28 9 17 11 16 13 12 24 1 25 35A3167 COMPLETE CAST IRON FULL-CAPACITY MAIN VALVE ASSEMBLY Figure 1. Type EGR Main Valve Assembly regulator inlet pressure is greater than the safe working pressure of the downstream equipment.
PAGE 4
Types 1098-EGR and 1098H-EGR 6 8 28 3 56 12 57 28 5 27 56 57 12 27 2 8 29 13 9 1 7 11 10 6 2 57 6 56 6 56 36A8540 Type 1098H 34A5692 13 7 4 9 1 11 10 Type 1098 Figure 2. Types 1098 and 1098H Actuator Assemblies 6 5 2 5 P590 Series Parts List (Figure 3) Key Description 7 1 4 3 1 2 3 4 5 6 7 11 12 Filter Body Filter Element Filter Head Machine Screw Washer Spring Washer Gasket NACE Tag (not shown) Tag Wire (not shown) A7008 Figure 3.
PAGE 5
Types 1098-EGR and 1098H-EGR 10 11 2 8 9 12 7 1 22 24 34A6635-B 4 42 6 3B 3 23 3 CB7988 OLD TYPE 6351 ASSEMBLY DRAWING SHOWING OLD BODY PLUG AND BODY PLUG GASKET NEW TYPE 6351 ASSEMBLY DRAWING SHOWING NEW BODY PLUG AND BODY PLUG o-ring Figure 4. Type 6351 Pilot Assembly 11 2 14 15 10 7 5 8 1 23 13 9 20 6 22 4 16 3 19 35A8889 21 12 17 35A6236 Detail of Type 6354M or 6354H pilot Complete Type 6352, 6353, or 6354L pilot Figure 5.
PAGE 6
Types 1098-EGR and 1098H-EGR 26 3 13 11 16 35 14 1 10 28 20A6328 12 Detail of Capped Adjusting Screw OPTION 4 24 9 8 1 2 18 17 20 15 25 19 7 50 27 6 5 28 28 35 40 5 22 34 6 33 44 1 43 30A6327 20A6326 Types 61L, 61LD, and 61LE pilot Detail Handwheel Option Figure 6.
PAGE 7
Types 1098-EGR and 1098H-EGR 30 3 26 10 13 11 14 16 25 5 4 24 20 2 12 15 9 34 28 8 18 7 50 1 27 35 34 23 6 41 17 19 35 30A6330 Detail of Capped Adjusting Screw OPTION 6 32A2068 Type 61H pilot Figure 7. Type 61H Pilot Assembly 6 34 7 35 50 1 27 48 16 42 14 10 4 45 26 13 47 2 15 52 51 53 3 19 46 34A0396 Figure 8.
PAGE 8
Types 1098-EGR and 1098H-EGR Industrial Regulators Natural Gas Technologies TESCOM Emerson Process Management Regulator Technologies, Inc. Emerson Process Management Regulator Technologies, Inc. Emerson Process Management Tescom Corporation USA - Headquarters McKinney, Texas 75069-1872, USA Tel: +1 800 558 5853 Outside U.S. +1 972 548 3574 USA - Headquarters McKinney, Texas 75069-1872, USA Tel: +1 800 558 5853 Outside U.S.