Instructions / Assembly

5
THERMOSTAT OVERVIEW
Before you begin using your thermostat, you should be familiar with its features, display and
the location/operation of the thermostat buttons and switches.
THERMOSTAT BUTTONS
AND SWITCHES
THE DISPLAY
1.) Fan Button 8.) Next (Menu button) is used to navigate within a menu
2.) Away Button (set a frequently used
temperature)
9.) Back (Fan button) is used to navigate within a menu
3.) System Button 10.) Exit (Away button) returns to the home screen
4.) Backlight Button (located on the top
of the thermostat)
11.) Thermostat is protecting the equipment from short cycling
(5-minute delay)
5.) Raises Temperature Setting 12.) Indicates that the system is running in Cool, Heat or Auxiliary
mode. (Heat Pump Only -The auxiliary will run in Heat mode
when the heat pump cannot maintain the set temperature.)
6.) Access Menu Options 13.) SEE TROUBLESHOOTING
7.) Lowers Temperature Setting 14.) Battery status indicator
15.) Replace battery indicator
16.) Temperature setpoint
17.) Appears when the keypad is locked (to prevent unwanted
changes)
USING THE THERMOSTAT
1
2
3
4
5
6
7
8
10
11
12
13
14
15 16
17
9
“
Replace
” appears in the display, new premium brand AA alkaline batteries
should be installed. If the house will be unoccupied for an extended period and either
“ ”
or “
Replace
” is displayed, install new batteries before leaving.
Whenever
6
USER MENU
To customize thermostat settings, press the Menu button from the home screen. Use the
or buttons to highlight Settings and press Next. Use Next and Back to navigate
through menu items. Press or to change the setting.
User’s Menu #
(Press Menu button
and release)
Description
Default Setting
(ashing icons)
Settings
(Press or )
01
Fahrenheit or Celsius °F
°F – Fahrenheit
°C – Celsius
02
Temperature Display
Adjustment: adjust the Room
Temperature)
0 -5 to +5
03
Continuous Display Light:
keep the backlight always on –
“C” wire required
OFF
On – always on
OFF – momentarily
04
Auto-Changeover: thermostat
automatically switches between
heat and cool
OFF
On - enable auto
OFF - disable auto
05
Keypad Lock: prevent unwant-
ed changes to the thermostat
OFF
On – disable buttons
OFF – all buttons are active
THERMOSTAT OPERATION
• Away – Stores a frequently used temperature setting so that you can select it with a
touch of the Away button. To set an Away temperature press temp up or temp down
to the temperature you want. At the desired setting, hold the Away button for 3 seconds.
When the setting is stored the set point will ash one time. You can store an Away setting
for both Cool and Heat modes. (Example: Set an Away temperature to 88°F in the summer
for cooling and 55°F in the winter for heating.)
• Keypad Lockout – To prevent unwanted changes, the buttons can be disabled.
To turn this feature On, press and hold and the Menu button unl the icon appears
(this can also be turned on in the menu). To turn O, press and hold and the Menu
button for 3 seconds.