2000IW/IW+ WELDING l STAKING l INSERTION l SWAGING l FORMING l SPOT WELDING l DEGATING l CUTTING AND SEALING Ultrasonic Assembly Systems 2000 Series Integrated Ultrasonic Plastic Welders IW/IW+ – 1100, 2200 & 3300 Watts
000 Series Integrated Ultrasonic Plastic Welders IW/ IW+ – 1100, 2200 & 3300 Watts Branson’s 2000 Series Integrated Welders are self-contained ultrasonic plastics assembly systems that combine a power supply module, process controls, and welding stand in a compact bench unit to conserve work space, ease setup, simplify operation, facilitate relocation, and make service convenient.
is terminated at a predetermined point in the stroke, measured from the top of the stroke. In collapse, the weld is terminated at a predetermined point in the stroke after the horn contacts the part and the trigger switch is activated. The position display is digital. With position modes, upper and lower limit ranges may be selected. •D igital parameter entry with autoranging - when entering parameters gives precise settings for repeatable accuracy.
trol, and a self-contained optical switch for accurate repeatability and long-term reliability. •R ugged construction and durability - Rigidity and consistent, precise alignment of the horn and parts during welding is provided by linear ball bearing slides. The slide system incorporates a rail in linear motion guides with four sets of preloaded, permanently pre-lubricated bearings.
Automation Interfacing Branson’s 2000 Series Integrated Welders can be interfaced with external devices and controls (e.g., PLCs). This will require both a J971 alarm cable and a J911 start cable (optional). A user I/O is built in. • S elect faults or weld errors sensed by the system can be communicated - outside the welder for monitoring and sorting suspect parts. Front panel or external reset access is provided.
product 2000IW/IW+ name Ordering Information 2000 Series Integrated Welders – on base; include converter and choice of aluminum booster. Branson EDP No. Optional Columns–Integrated welders include a 40” long column with 1/4” wall, standard. (Note: longer columns should be factory installed.) Longer columns will increase overall height.
