Bulletin 71.2:299H January 2014 299H Series Pressure Reducing Regulators • Inlet Pressure up to 175 psig / 12.1 bar • ±1% Accuracy for Fixed Factor Billing (PFM) • Rugged Construction • Compact • Easy to Maintain • Integral Pilot W7513 Figure 1. 299H Series Pressure Reducing Regulators • Optional Slam-Shut Configuration • No Bleed Monitor • High Capacity • Robust • Outlet Pressures up to 60 psig / 4.1 bar • Optional Token Relief www.fisherregulators.
Bulletin 71.2:299H Specifications Specifications for 299H Series constructions are given below. Some specifications for a given regulator as it originally comes from the factory are stamped on a nameplate located on the actuator upper casing. Available Constructions Type 299H: Pilot-operated pressure reducing regulator with a pilot integrally mounted to the actuator casing. Type 299HR: A Type 299H with a token internal relief valve to relieve minor overpressure caused by thermal expansion.
Bulletin 71.2:299H 3/4 NPT CONTROL LINE W7527-1 W7528-1 TYPE 299H WITH EXTERNAL REGISTRATION TYPE 299HR PILOT WITH OPTIONAL TOKEN RELIEF Figure 2. 299H Series Sectional Views Features • Compact in Size—Small envelope because of the built-in pilot and internal registration. • Unique No Bleed Monitor System—Flexible worker/monitor system setup that allows for bleed to be piped to the intermediate piping thus eliminating downstream bleed which reduces lost and unaccounted for gas.
Bulletin 71.2:299H Introduction Principle of Operation Description Letter keys in this section refer to Figure 3 unless otherwise noted. Fast response and accuracy are made possible by the amplifying effect of the pilot and by the two-path control system. The function of the pilot is to sense change in the controlled outlet pressure and amplify it into a larger change in the loading pressure.
Bulletin 71.2:299H B J OUTLET E H INLET 3/4 NPT CONTROL LINE CONNECTION K PILOT SUPPLY SCREEN G A C F A7268_1 TYPE 299H WITH INTERNAL REGISTRATION J J 3/4 NPT DOWNSTREAM CONTROL LINE CONNECTION 3/4 NPT DOWNSTREAM CONTROL LINE CONNECTION G A7269 EXTERNAL REGISTRATION A7270 G DUAL REGISTRATION INLET PRESSURE OUTLET PRESSURE ATMOSPHERIC PRESSURE LOADING PRESSURE Figure 3. Type 299H Operational Schematic A7272 A7271 TOKEN RELIEF CLOSED TOKEN RELIEF OPEN Figure 4.
HS Type 299HS Bulletin 71.2:299H EXTERNAL REGISTRATION EXTERNAL REGISTRATION INTERNAL REGISTRATION EXTERNAL REGISTRATION INTERNAL REGISTRATION SURE INTERNAL REGISTRATION E0072 INLET PRESSURE E0072 OUTLET PRESSURE ATMOSPHERIC PRESSURE LOADING PRESSURE Figure 5. Type 299HS Operational Schematic Type 299H In operation, assume the outlet pressure is less than the setting of pilot control spring (A).
Bulletin 71.2:299H Table 1. Body Sizes and End Connection Styles BODY MATERIAL AND END CONNECTION STYLES BODY SIZE, NPS / DN Cast Iron (For Types 299H and 299HR only) Ductile Iron Steel (For Types 299H and 299HR only) 1-1/4 1-1/2 NPT NPT ---NPT ---NPT 2 / 50 NPT, CL125 FF Flanged(1) NPT, CL125 FF and CL250 RF Flanged, PN 10/16 Flanged NPT, CL150 RF Flanged 1. This flange is available with a face-to-face dimension of 7.5 or 10 inches / 191 or 254 mm. Table 2.
Bulletin 71.2:299H OPTIONAL PILOT SUPPLY FILTER OR FILTERED PILOT SUPPLY REGULATOR OPTIONAL PILOT SUPPLY REGULATOR WIDE-OPEN MONITOR OPTIONAL PILOT SUPPLY REGULATOR WIDE-OPEN MONITOR WORKING REGULATOR OPTIONAL PILOT SUPPLY FILTER OR FILTERED PILOT SUPPLY REGULATOR WORKING REGULATOR A7136B A7136A NOTE: IF USED, THE PILOT SUPPLY REGULATOR SHOULD BE SET TO 3 psig / 0.21 bar ABOVE THE MONITOR OUTLET PRESSURE SETTING. NOTE: IF USED, THE PILOT SUPPLY REGULATOR SHOULD BE SET TO 3 psig / 0.
Bulletin 71.2:299H Table 3. Flow Coefficients ORIFICE DIAMETER WIDE-OPEN REGULATING(1) Inch mm Cg Cv Cg Cv C1 WHEN ∆P < 10 psi / 0.69 bar C1 WHEN ∆P > 10 psi / 0.69 bar 299H / 299HR 1/4 x 3/8 3/8 1/2 3/4 7/8 1 1-3/16 6.4 x 9.5 9.5 13 19 22 25 30 53 117 203 437 544 725 910 2.0 4.2 7.0 14.1 16.5 20.7 25.3 50 115 200 430 534 710 885 1.9 4.0 6.9 13.9 16.2 20.3 24.6 26 30 30 32 34 36 37 26 28 28 30 32 34 35 299HS / 299HSR 1/4 x 3/8 3/8 1/2 3/4 6.4 x 9.5 9.5 13 19 53 117 184 421 2.0 4.1 5.
Bulletin 71.2:299H Wide-Open Monitor The control line of the upstream regulator is connected downstream of the second regulator (Figure 6), so that during normal operation the monitoring regulator is standing wide open with the reduction to distribution pressure being taken across the working regulator. Only in case of open failure of the working regulator does the wide-open monitoring regulator take control at its slightly higher setting.
Bulletin 71.2:299H Table 5. Types 299H and 299HR Flow Capacities(1) for 1-1/2 NPT and NPS 2 / DN 50 External/Dual Registration OUTLET PRESSURE RANGE, SETTING, ACCURACY, SPRING PART NUMBER AND COLOR 3.5 to 6 inches w.c. / 9 to 15 mbar 3.5 inches w.c. / 9 mbar -1 to 2 inches w.c. / -2 to 5 mbar T13707T0012 Black 5 to 9 inches w.c. / 12 to 22 mbar 7 inches w.c. / 17 mbar -1 to 2 inches w.c. / -2 to 5 mbar T13589T0012 Yellow 7 to 20 inches w.c. / 17 to 50 mbar 14 inches w.c. / 35 mbar ±2 inches w.c.
Bulletin 71.2:299H Table 5. Types 299H and 299HR Flow Capacities(1) for 1-1/2 NPT and NPS 2 / DN 50 External/Dual Registration (continued) OUTLET PRESSURE RANGE, SETTING, ACCURACY, SPRING PART NUMBER AND COLOR 1 to 3.25 psig / 69 mbar to 0.22 bar 2 psig / 0.14 bar ±1% psia / bar T13593T0012 Light Blue 2.75 to 6 psig / 0.19 to 0.41 bar 5 psig / 0.34 bar ±1% psia / bar T13671T0012 Orange 5 to 16 psig / 0.34 to 1.1 bar 10 psig / 0.69 bar ±1% psia / bar T13600T0012 Red 5 to 16 psig / 0.34 to 1.
Bulletin 71.2:299H Table 5. Types 299H and 299HR Flow Capacities(1) for 1-1/2 NPT and NPS 2 / DN 50 External/Dual Registration (continued) OUTLET PRESSURE RANGE, SETTING, ACCURACY, SPRING PART NUMBER AND COLOR 14 to 35 psig / 0.97 to 2.4 bar 25 psig / 1.7 bar ±1% psia / bar 19B0432X012 Zinc 14 to 35 psig / 0.97 to 2.4 bar 30 psig / 2.1 bar ±1% psia / bar 19B0432X012 Zinc 14 to 35 psig / 0.97 to 2.4 bar 35 psig / 2.4 bar ±1% psia / bar 19B0432X012 Zinc 30 to 60 psig / 2.1 to 4.1 bar 40 psig / 2.
Bulletin 71.2:299H Table 6. Types 299H and 299HR Flow Capacities(1) for 1-1/2 NPT Internal Registration OUTLET PRESSURE RANGE, SETTING, ACCURACY, SPRING PART NUMBER AND COLOR 3.5 to 6 inches w.c. / 9 to 15 mbar 3.5 inches w.c. / 9 mbar -1 to 2 inches w.c. / -2 to 5 mbar T13707T0012 Black 5 to 9 inches w.c. / 12 to 22 mbar 7 inches w.c. / 17 mbar -1 to 2 inches w.c. / -2 to 5mbar T13589T0012 Yellow 7 to 20 inches w.c. / 17 to 50 mbar 14 inches w.c. / 35 mbar ±2 inches w.c.
Bulletin 71.2:299H Table 6. Types 299H and 299HR Flow Capacities(1) for 1-1/2 NPT Internal Registration (continued) OUTLET PRESSURE RANGE, SETTING, ACCURACY, SPRING PART NUMBER AND COLOR 1 to 3.25 psig / 69 mbar to 0.22 bar 2 psig / 0.14 bar ±1% psia / bar T13593T0012 Light Blue 2.75 to 6 psig / 0.19 to 0.41 bar 5 psig / 0.34 bar ±1% psia / bar T13671T0012 Orange 5 to 16 psig / 0.34 to 1.1 bar 10 psig / 0.69 bar ±1% psia / bar T13600T0012 Red 5 to 16 psig / 0.34 to 1.1 bar 15 psig / 1.
Bulletin 71.2:299H Table 6. Types 299H and 299HR Flow Capacities(1) for 1-1/2 NPT Internal Registration (continued) CAPACITIES IN SCFH / Nm3/h OF 0.6 SPECIFIC GRAVITY NATURAL GAS OUTLET PRESSURE RANGE, SETTING, ACCURACY, SPRING PART NUMBER AND COLOR 14 to 35 psig / 0.97 to 2.4 bar 25 psig / 1.7 bar ±1% psia / bar 19B0432X012 Zinc 14 to 35 psig / 0.97 to 2.4 bar 30 psig / 2.1 bar ±1% psia / bar 19B0432X012 Zinc 14 to 35 psig / 0.97 to 2.4 bar 35 psig / 2.
Bulletin 71.2:299H Table 7. Types 299H and 299HR Flow Capacities(1) for NPS 2 / DN 50 Internal Registration OUTLET PRESSURE RANGE, SETTING, ACCURACY, SPRING PART NUMBER AND COLOR 3.5 to 6-inches w.c. / 9 to 15 mbar 3.5-inches w.c. / 9 mbar -1 to 2-inches w.c. / -2 to 5 mbar T13707T0012 Black 5 to 9-inches w.c. / 12 to 22 mbar 7-inches w.c. / 17 mbar -1 to 2-inches w.c. / -2 to 5 mbar T13589T0012 Yellow 7 to 20-inches w.c. / 17 to 50 mbar 14-inches w.c. / 35 mbar ±2-inches w.c.
Bulletin 71.2:299H Table 7. Types 299H and 299HR Flow Capacities(1) for NPS 2 / DN 50 Internal Registration (continued) OUTLET PRESSURE RANGE, SETTING, ACCURACY, SPRING PART NUMBER AND COLOR CAPACITIES IN SCFH / Nm3/h OF 0.6 SPECIFIC GRAVITY NATURAL GAS Orifice Size Inch / mm INLET PRESSURE 1/4 x 3/8 / 6.4 x 9.5 3/8 / 95 1/2 / 13 3/4 / 19 1-3 / 16/30 bar SCFH Nm3/h SCFH Nm3/h SCFH Nm3/h SCFH Nm3/h SCFH Nm3/h SCFH Nm3/h 5 10 15 0.34 0.69 1.0 1020 1550 1920 27.3 41.5 51.
Bulletin 71.2:299H Table 7. Types 299H and 299HR Flow Capacities(1) for NPS 2 / DN 50 Internal Registration (continued) CAPACITIES IN SCFH / Nm3/h OF 0.6 SPECIFIC GRAVITY NATURAL GAS OUTLET PRESSURE RANGE, SETTING, ACCURACY, SPRING PART NUMBER AND COLOR 14 to 35 psig / 0.97 to 2.4 bar 25 psig / 1.7 bar ±1% psia / bar 19B0432X012 Zinc 14 to 35 psig / 0.97 to 2.4 bar 30 psig / 2.1 bar ±1% psia / bar 19B0432X012 Zinc 14 to 35 psig / 0.97 to 2.4 bar 35 psig / 2.
Bulletin 71.2:299H Table 8. Types 299HS and 299HSR Flow Capacities(1)(2) for 1-1/2 NPT and NPS 2 / DN 50 External/Dual Registration CAPACITIES IN SCFH/ Nm3/h OF 0.6 SPECIFIC GRAVITY NATURAL GAS OUTLET PRESSURE RANGE AND SETTING, CONTROL SPRING PART NUMBER AND COLOR 3.5 to 6 inches w.c. / 9 to 15 mbar 3.5 inches w.c. / 9 mbar -1 to 2 inches w.c. / -2 to 5 mbar T13707T0012 Black 5 to 9 inches w.c. / 12 to 22 mbar 7 inches w.c. / 17 mbar -1 to 2 inches w.c.
Bulletin 71.2:299H Table 8. Types 299HS and 299HSR Flow Capacities(1)(2) for 1-1/2 NPT and NPS 2 / DN 50 External/Dual Registration (continued) CAPACITIES IN SCFH / Nm3/h OF 0.6 SPECIFIC GRAVITY NATURAL GAS OUTLET PRESSURE RANGE AND SETTING, CONTROL SPRING PART NUMBER AND COLOR 1 to 3.25 psig / 69 mbar to 0.22 bar 2 psig / 0.14 bar ±1% psia / bar T13593T0012 Light blue 2.75 to 6 psig / 0.19 to 0.41 bar 5 psig / 0.34 bar ±1% psia / bar T13671T0012 Orange 5 to 16 psig / 0.34 to 1.1 bar 10 psig / 0.
Bulletin 71.2:299H Table 9. Types 299HS and 299HSR Flow Capacities(1)(2) for 1-1/2 NPT and NPS 2 / DN 50 Internal Registration CAPACITIES IN SCFH / Nm3/h OF 0.6 SPECIFIC GRAVITY NATURAL GAS OUTLET PRESSURE RANGE AND SETTING, CONTROL SPRING PART NUMBER AND COLOR 3.5 to 6 inches w.c. / 9 to 15 mbar 3.5 inches w.c. / 9 mbar -1 to 2 inches w.c. / -2 to 5 mbar T13707T0012 Black 5 to 9 inches w.c. / 12 to 22 mbar 7 inches w.c. / 17 mbar -1 to 2 inches w.c. / -2 to 5 mbar T13589T0012 Yellow 7 to 20 inches w.c.
Bulletin 71.2:299H Table 9. Types 299HS and 299HSR Flow Capacities(1)(2) for 1-1/2 NPT and NPS 2 / DN 50 Internal Registration (continued) CAPACITIES IN SCFH / Nm3/h OF 0.6 SPECIFIC GRAVITY NATURAL GAS OUTLET PRESSURE RANGE AND SETTING, CONTROL SPRING PART NUMBER AND COLOR 1 to 3.25 psig / 69 mbar to 0.22 bar 2 psig / 0.14 bar ±1% psia / bar T13593T0012 Light blue 2.75 to 6 psig / 0.19 to 0.41 bar 5 psig / 0.34 bar ±1% psia / bar T13671T0012 Orange 5 to 16 psig / 0.34 to 1.1 bar 10 psig / 0.
Bulletin 71.2:299H Table 10. Types 299HS and 299HSR Flow Capacities(1)(2) for 2 NPT Internal Registration OUTLET PRESSURE RANGE AND SETTING, CONTROL SPRING PART NUMBER AND COLOR 3.5 to 6 inches w.c. / 9 to 15 mbar 3.5 inches w.c. / 9 mbar -1 to 2 inches w.c. / -2 to 5 mbar T13707T0012 Black 5 to 9 inches w.c. / 12 to 22 mbar 7 inches w.c. / 17 mbar -1 to 2 inches w.c. / -2 to 5 mbar T13589T0012 Yellow 7 to 20 inches w.c. / 17 to 50 mbar 14 inches w.c. / 35 mbar ±2 inches w.c.
Bulletin 71.2:299H Table 10. Types 299HS and 299HSR Flow Capacities(1)(2) for 2 NPT Internal Registration (continued) OUTLET PRESSURE RANGE AND SETTING, CONTROL SPRING, PART NUMBER AND COLOR 1 to 3.25 psig / 69 mbar to 0.22 bar 2 psig / 0.14 bar ±1% psia / bar T13593T0012 Light blue 2.75 to 6 psig / 0.19 to 0.41 bar 5 psig / 0.34 bar ±1% psia / bar T13671T0012 Orange 5 to 16 psig / 0.34 to 1.1 bar 10 psig / 0.69 bar ±1% psia / bar T13600T0012 Red 5 to 16 psig / 0.34 to 1.1 bar 15 psig / 1.
Bulletin 71.2:299H A 4.9 / 124 4.3 / 109 3.1 / 79 1/4 NPT VENT 8.6 / 218 3/4 NPT CONTROL LINE CONNECTION TYPE P590 FILTER OPTION 12.1 / 307 13.7 / 348 3/4 NPT ALTERNATE CONTROL LINE CONNECTION TYPE 67CF FILTERED PILOT SUPPLY REGULATOR OPTION 5.8 / 147 9.0 / 229 7.9 / 201 A7274 Figure 8. Types 299H and 299HR Dimensions Table 12. Types 299H and 299HR Dimensions DIMENSION Inch A NPT 6.
Bulletin 71.2:299H POSITION C POSITION D POSITION F POSITION E (STANDARD) POSITION 1 POSITION 2 POSITION 3 POSITION 4 (STANDARD) Figure 10. Body and Vent Positions Ordering Information To order, complete the Ordering Guide on pages 27 and 28. Carefully review the Specifications section on page 2 and specify the desired selection whenever there is a choice to be made.
Bulletin 71.2:299H Ordering Guide (continued) Low Pressure Trip (Select One) (For OPSO/UPSO only) 2 to 12 inches w.c. / 5 to 30 mbar*** 4 to 30 inches w.c. / 10 to 75 mbar*** 0.36 to 2.3 psig / 25 to 159 mbar*** 1.5 to 10.8 psig / 103 to 745 mbar*** Type P590 Pilot Supply Filter (Optional) Type P593-1, Aluminum Type 594-1, Brass Type 67CF Filtered Pilot Supply Regulator (Optional) Yes, please add a Type 67CF regulator to this order.