Specifications

Reference Manual
00809-0200-4801, Rev CA
July 2010
B-31
Rosemount 3051S
Figure B-11. 3051S_L Liquid
Level Transmitter
ACCESSORIES Rosemount Engineering Assistant (EA)
Software Packages
The Rosemount Engineering Assistant software supports flow configuration for the 3051S
MultiVariable and 3051S F
OUNDATION fieldbus. The package is available with or without modem
and connecting cables. All configurations are packaged separately.
For best performance of the EA Software, the following computer hardware and software is
recommended:
• Pentium, 800MHz personal computer or above
• 512 MB RAM
• 350 MB of available hard disk space
•Microsoft
®
Windows
™
2000 or XP Professional
Side View Front View
Flush Flanged Configuration Extended Flanged Configuration
Dimensions are in inches (millimeters)
A
4.20 (107)
H
A
Extension
2, 4, or 6 (51, 102, or 152)
E
D
4.20 (107)
H
5.21 (132)
7.09
(180)
4.55 (116)
9.65
(245)
8.53
(217)
B
C
Class
Pipe
Size
Flange
Thickness A
Bolt Circle
Diameter B
Outside
Diameter C
No. of
Bolts
Bolt Hole
Diameter
Extension
Diameter
(1)
D E H
ASME B16.5 (ANSI) 150
2 (51) 0.69 (18) 4.75 (121) 6.0 (152) 4 0.75 (19) N/A 3.6 (92) 5.65 (143)
3 (76) 0.88 (22) 6.0 (152) 7.5 (191) 4 0.75 (19) 2.58 (66) 5.0 (127) 5.65 (143)
4 (102) 0.88 (22) 7.5 (191) 9.0 (229) 8 0.75 (19) 3.5 (89) 6.2 (158) 5.65 (143)
ASME B16.5 (ANSI) 300
2 (51) 0.82 (21) 5.0 (127) 6.5 (165) 8 0.75 (19) N/A 3.6 (92) 5.65 (143)
3 (76) 1.06 (27) 6.62 (168) 8.25 (210) 8 0.88 (22) 2.58 (66) 5.0 (127) 5.65 (143)
4 (102) 1.19 (30) 7.88 (200) 10.0 (254) 8 0.88 (22) 3.5 (89) 6.2 (158) 5.65 (143)
ASME B16.5 (ANSI) 600
2 (51) 1.00 (25) 5.0 (127) 6.5 (165) 8 0.75 (19) N/A 3.6 (92) 7.65 (194)
3 (76) 1.25 (32) 6.62 (168) 8.25 (210) 8 0.88 (22) 2.58 (66) 5.0 (127) 7.65 (194)
DIN 2501 PN 10–40
DN 50 20 mm 125 mm 165 mm 4 18 mm N/A 4.0 (102) 5.65 (143)
DIN 2501 PN 25/40
DN 80 24 mm 160 mm 200 mm 8 18 mm 66 mm 5.4 (138) 5.65 (143)
DN 100 24 mm 190 mm 235 mm 8 22 mm 89 mm 6.2 (158) 5.65 (143)
DIN 2501 PN 10/16
DN 100 20 mm 180 mm 220 mm 8 18 mm 89 mm 6.2 (158) 5.65 (143)
(1) Tolerances are 0.040 (1,02), –0.020 (0,51).