Switch User Manual

Engine-Generator Details
• Voltage: Phase to phase; Phase to neutral
• Current for each phase.
• Kilowatts and kilowatt hours total.
• Frequency and power factor.
• Status and control of four digital outputs which can be
customized by the user.
• Status of eight digital inputs.
• “Alarm Enabled” selection. These alarms flash the
“engine-generator” icon on the summary screen.
• Digital inputs for engine malfunctions are derived
from engine mounted sensors (supplied by others).
Power Manager Detail Screen
• Voltage: phase to phase; phase to neutral and
voltage unbalance.
• 3 phase currents and neutral (optional).
• Frequency.
• Kilowatt hours - normal and emergency.
• Status and control of four relay outputs.
• Status of eight digital inputs.
• Device ratings: CT and PT ratio.
Transfer Switch Detail Screen
• ATS rating and identification data is displayed.
• Allows remote testing and time delay bypass.
• Voltage, frequency, phase sequence, voltage unbalance
and time delay settings can be checked.
• Viewing of engine exercise schedules.
• Displays phase to phase voltage on normal and
emergency.
• Provides complete system status message from
7000 series microprocessor controller.
• View event log on the last 99 events for each ATS.
• Arrange test schedules for transfer switches.
• Provides for monitoring of local site or remote sites.
Page 19
Power Manager / Data Monitor Screen
Power Manager / Data Monitor Screen
ADDRESS
USER
NONE
8
Voltage AB
Voltage BC
Voltage CA
Voltage AN
Voltage BN
Voltage CN
Voltage
207
209
208
119
120
1
Current A
Current B
Unbal %
469
472
40
136
0
136
KVAR
KVA
475
85
78
163
KVARH lag
KVARH lead
KVARH net
Current
Power
Normal Energy
Status Input 1
Bypass to Normal
Bypass to Emergency
ATS Test
ATS Isolated
Normal Breaker Trip
Digital Input
Status
121
Start Engine
Output 2
Output 3
Output 4
Digital Output
Status
on
off
off
off
Relay 1
PreviousPreviousRelay 3
Relay 2
PreviousPreviousRelay 4
Toggle
Reset Emergency
ATS Summary
Unbal % L-L
KWatt
Current C
Status Input 7
Status Input 8
Frequency
1
59.97
Power Factor
2
1
3
KVARH lag
KVARH lead
KVARH net
Emergency Energy
890763
0
890763
KWH imp
KWH exp
KWH net
21
7
25
KWH imp
KWH lead
KWH net
Reset Normal
1000
120
CT Ratio
PT Ratio
Device
ASCO
ᓼ
ASCO
ᓼ
Engine-Generator Screen
Engine-Generator Screen
ENGINE
USER
NONE
4
Voltage AB
Voltage BC
Voltage CA
Voltage AN
Voltage BN
Voltage CN
Vol tage
207
209
208
119
120
1
Current A
Current B
Unbal %
469
472
40
136
43441
60
KWH net
Frequency
Power Factor
890784
0
890784
KWH imp
KWH exp
KWH net
475
60
85
78
163
KVARH lag
KVARH lead
KVARH net
Current Power Energy
Engine Oil Temp
Low Fuel
Low Oil Pressure
Bypass Closed
Bypass on Test
Normal Brkr Temp
Digital Input
No
No
Yes
No
No
No
No
No
Alarm
Enabled Status
121
Start Engine
Output 2
Output 3
Output 4
Digital Output
Status
on
off
off
off
Relay 1
PreviousPreviousRelay 3
Relay 2
PreviousPreviousRelay 4
Toggle
Reset
ATS Summary
Unbal % L-L
KW Total
Current C
Status Input 7
Status Input 8
ASCO
ᓼ
ASCO
ᓼ
ATS Details Screen
ATS Details Screen
PC
6/15/99
11:08:54 AM
Description
ATS 8 Location Switch 1
Transfer Switch
Ver.
ADRTST-E12
CP
6/13/99
10:02:42
1
ATS
Locked Out
N0
In-Phase
Monitor
Enabled
Yes
Switch Data
Nom Voltage
Current Rating
Nom Freq
# Phases
208
1200
50
1
Normal Vab
Normal Vbc
Normal Vca
Normal Freq
Emerg Vab
Emerg Vbc
Emerg Vca
Emerg Freq
202
205
205
59
0
0
0
0
ATS Summary
Event Log
Event Cause
Emerg Became
Not Vail
Emergency
Failure
Date 06/12/01
Time 16:05:42
Test Schedules
205 NVca
0 EVca
ATS1
OTTS
E
L
N
Transfer
Re Transfer
Timer Bypass
00 : 03
00 : 10
30 : 00
02 : 00
00 : 00
03 : 00
Engine Start-Norm Fail
Norm to Emerg
Emerg to Norm-Src Fail
Emerg to Norm-Test Xfer
Emerg to Norm-Emerg Fail
Time Delay Settings [min]:[sec]
Volt a g e P.U.
Volt a g e D. O.
Voltage Trip
Freq P.U.
Freq D.O.
Freq Trip
Volt Unbal P.U.
Volt Unbal D.O.
Voltage or Freq % Nom Value
Normal Voltage Frequency Settings
8
PRESENT STATE
Load On Normal
Normal OK
95
90
0
10
20
197.6
197.6
0
47.5
45
0
20.8
41.6
95
70
0
Select Emergency Settings
Engine Cool Down
Standard TD
Pre/Post Signal TD
Non - Standard TD
Select
Update Time
Event Logging (Max. 99 Entries)
USER
None
ASCO
ᓼ
®
ASCO
