Data Sheet
Bulletin 74.3:ACE97
15
(Select One)
CF8M Stainless steel
CF3M Stainless steel
(Select One from Each Category)
Pad Valve Body
NPS 1/2 / DN 15 NPS 1 / DN 25 NPS 2 / DN 50
C
v
= 0.4 C
v
= 1 C
v
= 20
C
v
= 0.2 C
v
= 2 C
v
= 45
C
v
= 4 C
v
= 60
C
v
= 7.5
C
v
= 10
Depad Valve Body
NPS 1 / DN 25 NPS 2 / DN 50
C
v
= 3 C
v
= 20
C
v
= 6 C
v
= 35
C
v
= 12 C
v
= 70
C
v
= 17
NPS 3 / DN 80 NPS 4 / DN 100
C
v
= 90 C
v
= 150
C
v
= 115 C
v
= 200
C
v
= 140 C
v
= 280
(Select One)
NPS 1/2 / DN 15 Body Size
NPT
CL150 RF threaded ange and nipple
NPS 1 / DN 25 Body Size
NPT
CL150 RF threaded ange and nipple
NPS 2 / DN 50 Body Size
NPT
CL150 RF threaded ange and nipple
(Must Match or be Larger than the Largest Pad or
Depad Valve Body Size)
NPS 1 / DN 25, CL150 RF
NPS 2 / DN 50, CL150 RF
NPS 3 / DN 80, CL150 RF
NPS 4 / DN 100, CL150 RF
Diaphragm (Select One)
Nitrile (NBR)
Ethylenepropylene (EPDM - EPA)
Fluorocarbon (FKM)
(Select One)
Nitrile (NBR)
Ethylenepropylene (EPDM - EPA)
Fluorocarbon (FKM)
Peruoroelastomer (FFKM)
(Select One)
0.5 to 3-inches w.c. / 1 to 7 mbar
4 to 10-inches w.c. / 10 to 25 mbar
0.5 to 7-inches w.c. / 1 to 17 mbar
4 to 6-inches w.c. / 10 to 15 mbar
3 to 13-inches w.c. / 7 to 32 mbar
4 to 16-inches w.c. / 10 to 40 mbar
4 to 10-inches w.c. / 10 to 25 mbar
16 to 78-inches w.c. / 40 to 194 mbar
0.5 to 1.4 psig / 0.03 to 0.10 bar
0.25 to 1 psig / 0.02 to 0.07 bar
1 to 2.2 psig / 0.07 to 0.15 bar
0.25 to 2 psig / 0.02 to 0.14 bar
(Optional)
Yes No
(Select as many as Desired)
Pad inlet pressure gauge, stainless steel
Dwyer
®
control pressure gauge, 15 psig / 1.0 bar max
2 Dwyer
®
control pressure gauges (to span pad and
depad setpoints)
Control pressure gauge, above 4-inch w.c. / 10 mbar range,
4-inch / 102 mm diameter (max pressure limited to 130% of
gauge span) with shutoff valve, stainless steel
2 control pressure gauges, same as above (to span pad and
depad setpoints)
Sensing line purge, stainless steel
Main line purge, stainless steel
Dwyer
®
XP pressure switch, aluminum housing
Pad main line check valve for pad valve, stainless steel
Diagnostic and inlet gauges (NPS 1 or 2 / DN 25 or 50 pad
valve only)
Note: Standard sense line connection is 1/2 NPT.
Dwyer
®
is a mark owned by Dwyer Instruments Inc.