Brochures and Data Sheets

13
4000 SERIES POWER MONITORING & CONTROL
Fig. 13: ASCO
Remote Annuciator
Fig. 11: Serial
Module 72A
Fig. 12: Connectivity
Module 72E
5350 Remote Annunciator
The ASCO Power Transfer Switch Remote Annunciator is a stand-alone, industrial
grade interface device providing you with the most critical transfer switch status
indication and transfer/retransfer control for up to eight switches. Ethernet
technology is built in for faster and more reliable communications. LEDs
indicate switch status and position, while separate push buttons individually initiate
transfer switch operation and testing. Transfer switch annunciators can be set up in
multiple locations to monitor various transfer switches, allowing redundant and
distributed annunciation.
5110 Serial Module
The 5110 Serial Module is used to allow local or remote communications with ASCO
POWERQUEST
®
communication products.
The module is used to connect the 4000 S
ERIES transfer switches to a serial network
via an RS-485 interface. The module has two port connectors used for ATS & Power
Manager connectivity.
The serial connection is accomplished from a 5-pin terminal header/socket block.
RS- 485 serial networks allow for up to 32 modules to be set up in a daisy chain
configuration to connect to POWERQUEST
®
systems.
5150 Connectivity Module
The 5150 Connectivity Module is used to bring several different serial devices that
communicate at different baud rates and with different protocols to a common
Ethernet media.
The module is used to connect 4000 S
ERIES transfer switches, and ASCO Remote
Annuciators to a standard Ethernet TCP/IP network with standard 10base T(RJ-45)
connectors. The module has customized embedded JAVA
TM
applets (program
applications for an internet browser) for each monitored device that loads
automatically to a standard Web Browser.
The module is designed to communicate with up to 8 clients such as Web
applications (web pages), POWERQUEST
®
, or third party Modbus
®
devices
simultaneously over an Ethernet connection.