User Guide

FRU Inventory Commands Supported Commands
ATCA-7350 Control via IPMI Programmer’s Reference (6806800H29E)
17
2.1.5 FRU Inventory Commands
2.1.6 Sensor Device Commands
Table 2-5 Supported FRU Inventory Commands
Command NetFn (Request/Response) CMD
Get FRU Inventory Area Info 0x0A/0x0B 0x10
Read FRU Data 0x0A/0x0B 0x11
Write FRU Data 0x0A/0x0B 0x12
Table 2-6 Supported Sensor Device Commands
Command
NetFn
(Request/Response) CMD Comments
Get Device SDR Info 0x04/0x05 0x20 -
Get Device SDR 0x04/0x05 0x21 -
Reserve Device SDR Repository 0x04/0x05 0x22 -
Get Sensor Reading Factors 0x04/0x05 0x23 -
Set Sensor Hysteresis 0x04/0x05 0x24 -
Get Sensor Hysteresis 0x04/0x05 0x25 -
Set Sensor Threshold 0x04/0x05 0x26 -
Get Sensor Threshold 0x04/0x05 0x27 -
Set Sensor Event Enable 0x04/0x05 0x28 -
Get Sensor Event Enable 0x04/0x05 0x29 -
Get Sensor Event Status 0x04/0x05 0x2B -
Get Sensor Reading 0x04/0x05 0x2D -
Get Sensor Type 0x04/0x05 0x2F -
Set Event Receiver 0x04/0x05 0x00 -
Get Event Receiver 0x04/0x05 0x01 -
Platform Event 0x04/0x05 0x02 -