User Guide

Chassis Device Commands Supported Commands

ATCA-7350 Control via IPMI Programmer’s Reference (6806800H29E)

2.1.7.1.1 System Boot Options Parameter #5

This boot parameter is implemented as specified within the IPMI specification, but not all flags

are supported.

Table 2-9 System Boot Options Parameter #5

Data Byte Description

1 [7] - 1b = boot flags valid. The bit should be set to indicate that valid flag data is

present. This bit may be automatically cleared based on the boot flag valid bit

clearing parameter, above.

[6] - Not supported.

[5] - Not supported

[4:0] - reserved

2 [7] - 1b = CMOS clear

[6] - Not supported

[5:2] - Boot device selector

0000b = No override

0001b = Force PXE

0010b = Force boot from default Hard-drive

0011b = Not supported

0100b = Not supported

0101b = Force boot from default CD/DVD

0110b = Not supported

0111b-1110b = Reserved

1111b = Force boot from Floppy/primary removable media

[1] - 1b = Not supported

[0] - 1b = Not supported

3 Not supported

4 Not supported

5 Reserved