User Guide

ATCA-7350 Control via IPMI Programmer’s Reference (6806800H29E)

Supported Commands PICMG 3.0 Commands

2.2 PICMG 3.0 Commands

The Emerson IPMC is a fully compliant AdvancedTCA intelligent Platform Management

Controller i.e. it supports all required and mandatory AdvancedTCA commands as defined in

the PICMG 3.0 specifications.

Table 2-14 Supported PICMG 3.0 Commands

Command

NetFn

(Request/Response) CMD Comments

Get PICMG Properties 0x2C/0x2D 0x00 -

Get Address Info 0x2C/0x2D 0x01 -

FRU Control 0x2C/0x2D 0x04 -

Get FRU LED Properties 0x2C/0x2D 0x05 -

Get FRU LED Color Capabilities 0x2C/0x2D 0x06 -

Set FRU LED State 0x2C/0x2D 0x07 -

Get FRU LED State 0x2C/0x2D 0x08 -

Set IPMB State 0x2C/0x2D 0x09 -

Set FRU Activation Policy 0x2C/0x2D 0x0A -

Get FRU Activation Policy 0x2C/0x2D 0x0B -

Set FRU Activation 0x2C/0x2D 0x0C -

Get Device Locator Record ID 0x2C/0x2D 0x0D -

Set Port State 0x2C/0x2D 0x0E -

Get Port State 0x2C/0x2D 0x0F -

Compute Power Properties 0x2C/0x2D 0x10 -

Set Power Level 0x2C/0x2D 0x11 -

Get Power Level 0x2C/0x2D 0x12 -

Get IPMB Link Info 0x2C/0x2D 0x18 -

Set AMC Port State 0x2C/0x2D 0x19 -

Get AMC Port State 0x2C/0x2D 0x1A -

Get FRU Control Capabilities 0x2C/0x2D 0x1E -

Get target upgrade capabilities 0x2C/0x2D 0x2E -

Get component properties 0x2C/0x2D 0x2F -

Abort firmware upgrade 0x2C/0x2D 0x30 -

Initiate upgrade action 0x2C/0x2D 0x31 -

Upload firmware block 0x2C/0x2D 0x32 -

Finish firmware upload 0x2C/0x2D 0x33 -

Get upgrade status 0x2C/0x2D 0x34 -