User Guide

ATCA-7350 Control via IPMI Programmer’s Reference (6806800H29E)

FRU Information and Sensor Data Records Sensor Data Records

Entity ID 0xA0 PICMG Front Board

Sensor Type 0x2B Version Change

Event/Reading Type 0x6F Discrete (sensor-specific)

Assertion Event Mask(Byte 15) 0x81 -

Assertion Event Mask(Byte 16) 0x00 -

Assertion Events - -

- Event Offset: 7 Software or firmware change

detected with associated entity was

successful.

Deassertion Event Mask(Byte 17) 0x00 -

Deassertion Event Mask(Byte 18) 0x00 -

Threshold Mask(Byte 19) 0x81 -

Threshold Mask(Byte 20) 0x00 -

Base Unit 0x00 (unspecified)

Rearm mode 0x01 Auto

Hysteresis Support 0x00 No Hysteresis or unspecified

Threshold Access Support 0x00 No Thresholds

Event Message Control 0x00 Per Threshold / Discrete State

Reading Definition - -

Table 3-34 Watchdog Sensor

Feature Raw Value Description

Sensor Name Watchdog -

Sensor LUN 0x00 -

Sensor Number 0x17 -

Entity ID 0xA0 PICMG Front Board

Sensor Type 0x23 Watchdog 2

Event/Reading Type 0x6F Discrete (sensor-specific)

Assertion Event Mask(Byte 15) 0x0F -

Assertion Event Mask(Byte 16) 0x00 -

Assertion Events - -

- Event Offset: 0 Timer expired, status only (no

action, no interrupt)

- Event Offset: 1 Hard reset

- Event Offset: 2 Power down

- Event Offset: 3 Power cycle

Deassertion Event Mask(Byte 17) 0x00 -

Table 3-33 Ver Change Sensor (continued)

Feature Raw Value Description