Autochangeover Controllers Owner Manual

View Status Options
29
5.8 View Operation
The Operation option allows you to view the current settings for Auto
Sequencing, Standby Testing and Staging in each zone.
Use the following steps to select a zone and view the status of these
features.
5.8.1 Select a Zone
To select a zone:
• From the Main Menu, use the arrows
↑↓ to choose View Status,
then press Enter ↵.
• From the View Status Menu, use the arrows
↑↓ to choose View
Operation, then press Enter ↵.
• From the Zone Selection screen, use the arrows
↑↓ to choose the
zone you want to view—Zone 1 in the example at right—and press
Enter ↵.
5.8.2 View Operation
The Operation screen displays the following details for each feature:
• the name of the feature (for example,
AUTO SEQUENCING)
•the status (
ON or OFF)
• the date and time when Auto Sequencing or Standby Testing is
scheduled to occur (for example,
DAY 01 OF 02 (08:55). The time
appears in the format HH:MM (hours and minutes in military
time)
OR
• the target setpoint and sensitivity level that will initiate Staging
To change these settings, see the following sections in 7.10 - Setup
Operation:
• 7.10.1 - Turn Automatic Sequencing On or Off
• 7.10.2 - Turn Standby Testing On or Off
• Press ESC to return to the Zone Selection Menu.
Main Menu
> VIEW STATUS
SYSTEM AND CONTROL
↑↓=NEXT
↵=SELECT
View Status Menu
VIEW ACTIVE ALARMS
VIEW ALARM LOG
VIEW EVENT LOG
VIEW TREND LOG
VIEW INPUT STATUS
VIEW OUTPUT STATUS
VIEW PAGER NUMBERS
> VIEW OPERATION
VIEW CONTROL STATUS
Zone Selection
SELECT ZONE FOR
VIEWING
> ZONE 1
↑↓=NEXT ↵=EDIT
Operation
AUTO SEQUENCING ON
DAY 01 OF 02 (08:55)
STANDBY TESTING OFF
STAGING OFF