Owner`s manual

Setup and Installation

The following setup and installation diagrams show the different video and audio connections to TV, VCR or CD

Recorder.

Important

Make sure the AC Voltage matches your local voltage.

Connect the AC cord only after the speakers, antennas, and all optional equipment have been

connected.

(1) Video Connections

For good picture quality, use the RCA VIDEO CABLE

(Included)

NOTE: When in AV1 or AV2 mode, only composite video sources will have video output signal, therefore, connect

only RCA video output or TV Out to your TV sets.

NOTE: Not all TVs have S-Video or Component Video Input jacks.

For better picture quality, use S-VIDEO CABLE (not included). For best picture

quality, use COMPONENT VIDEO CABLE (not included)