User`s manual

Management Processor Monitor: MPC8548 Environment
10009109-01 ATCA-9305 User’s Manual
9-27
The monitor supports optional environment variables that enable additional functionality.
The moninit command (see “moninit” on page 9-22) clears all environment variables and
sets the standard environment variables to the default values. All optional environment vari-
ables are removed after moninit. However, it can clear all optional variables.
eth1addr 00:80:F9:
98:00:00-
00:80:F9:
98:FF:FF
ATCA-9305 board Ethernet address for TSEC_2 port, the last
digits are the board serial number in hex.
fru_id undefined Corresponds to ATCA-9305 processing resources
Valid options: Not defined in default configuration—
reported at bootup from the IPMC
gatewayip 0.0.0.0 Select the network gateway machine IP address
hostname EMERSON
_ATCA-
9305
Target hostname
icache on Enables the processor L1 instruction cache
Valid options: on, off
ipaddr 0.0.0.0 Board IP address
l2cache on Enables the L2 cache
Valid options: on, off
loadaddr 0x100000 Define the address to download user application code (used
with TFTP)
model ATC A-
9305
Board model number
ncip undefined Sets the IP address and the destination port, format is
<ip_addr>;<port>
netmask 0.0.0.0 Board sub-network mask
powerondiags on Turns POST diagnostics on or off after power-on/reset
Valid options: on, off
preboot undefined Command to execute immediately before starting the
CONFIG_BOOTDELAY countdown and/or running the auto-
boot command entering the interactive mode
rootpath eng/
emerson/
Path name of the NFS’ server root file system
serial# xxxxx Board serial number
serverip 0.0.0.0 Boot server IP address
tftp_port eTSEC_1 Selects which Ethernet port will be used for tftp
Valid options: eTSEC_1, eTSEC_2
Variable:
Default
Value: Description: (continued)