User`s manual

Management Processor CPLD: MPC8548 PLD Register
10009109-01 ATCA-9305 User’s Manual
5-7
Reset Command 4
The write-only Reset Command 4 register forces one of several types of Cavium 2 resets, as
shown below. A reset sequence is first initiated by writing a one to a single valid bit, then the
PLD performs that particular reset, and the bit is automatically cleared.
Register 5-12: Reset Command 4 (0x30)
Reset Command 5
The write-only Reset Command 5 register forces one of several types of BCM5680x Ethernet
switch resets, as shown below. A reset sequence is first initiated by writing a one to a single
valid bit, then the PLD performs that particular reset, and the bit is automatically cleared.
Register 5-13: Reset Command 5 (0x34)
Reset Command Sticky #1
The read/write Reset Command Sticky #1 register forces one of several types of the group-
complex resets, as shown below. A reset sequence is first initiated by writing a one to one or
more bits, then the PLD performs that particular reset. The bit will persist until cleared.
1 reserved
0 reserved
Bits: Function: Description:
7 CAV2R Cavium 2 Reset
6 CAV2PR Cavium 2 PCI Reset
5 CAV2DR Cavium 2 DDR SDRAM Reset
4 CAV2F Cavium 2 4 MB Flash (Cavium local bus) reset
3 CAV2M3 Cavium 2 MIP3 reset
2 CAV2M4 Cavium 2 MIP4 reset
1 reserved
0 reserved
Bits: Function: Description:
7 SWIR Switch Reset
6 TSEC1R TSEC1 Ethernet to front panel PHY Reset
5 TSEC2R TSEC2 Ethernet to switch PHY Reset
4 FPIR FPI Ethernet to front panel PHY Reset
3 BCR Ethernet dual PHY to backplane Base Channel reset
2 reserved
1 reserved
0 reserved
Bits: Function: Description: (continued)