Owner`s manual

6
U.L. Model No.: CF5100
3. Ceiling Fan Assembly (continued)
Installation of Switch Cup
Assembly for Manual Control
3.4
Engage the connector of the switch cup assembly with
the motor connector (Figure 4). The two connectors are
keyed and color-coded and must be mated correctly
(color-to-color) before they can be engaged. Make sure
the connector latch closes properly.
Rotate the switch cup assembly to align the pull chain
switch with the slot of the switch cup adapter (Figure 4).
SWITCH CUP
ASSEMBLY
CONNECTOR
MOTOR
CONNECTOR
PULL CHAIN SWITCH
SLOT
SWITCH CUP
ASSEMBLY
SWITCH CUP
ADAPTER
Figure 4
Installation of Switch Cup
Assembly for Manual Control
3.5
Carefully tuck all wires and connectors under the switch
cup assembly.
Secure the switch cup assembly by installing the three
#6-32 x 3/8” flat head screws (provided) (Figure 5).
SWITCH CUP
ASSEMBLY
#6-32 x 3/8" FLAT
HEAD SCREWS (3)
Figure 5
3.6
Turn the partially assembled ceiling fan right side up for
final preparation. Place the fan carefully onto the top of
the styrofoam as not to bend the ceiling fan blades
(Figure 6).
PARTIALLY
ASSEMBLED
CEILING FAN
Figure 6
To avoid possible fire or shock, do not pinch wires
between the switch cup assembly and the switch cup
adapter.
WARNING
!
BP7480 CF5100 PENBROOKE SELECT 12/18/13 10:35 AM Page 6