READ AND SAVE THESE INSTRUCTIONS Ceiling Fan Owner's Manual 42" Model Numbers CF704BS03 - Brushed Steel CF704ORB03 - Oil Rubbed Bronze CF704WW03 - Appliance White Net Weight: 12.1 Lbs. 29" Model Numbers CF702ORB04 - Oil Rubbed Bronze CF702WW04 - Appliance White Net Weight: 11.2 Lbs. Questions, problems, missing parts: Before returning to the store call Emerson Electric Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-800-654-3545 www.emersonfans.com Part No.
READ AND SAVE THESE INSTRUCTIONS Safety Instructions ! WARNING TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: a. Use this unit only in a manner intended by the manufacturer. If you have questions, contact the manufacturer. b. Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally.
This Manual Is Designed to Make it as Easy as Possible for You to Assemble, Install, Operate and Maintain Your Ceiling Fan Tools Needed for Assembly One Phillips head screwdriver One 1/4" blade screwdriver Three wire connectors (supplied) One stepladder One wire stripper Installed Wire Length Up to 50 ft. 50 - 100 ft. ! MATERIALS Wiring outlet box and box connectors must be of type required by local code. The minimum wire would be a 3-conductor (2-wire with ground) of the following size: Wire Size A.W.
How to Put Your Ceiling Fan Together NOTE: If your switch housing assembly is already attached to the switch housing plate, proceed to Step 3. SWITCH HOUSING ASSEMBLY SWITCH MOTOR CUP CONNECTOR CONNECTOR 1. Engage the connector of the switch housing assembly with the motor connector (Figure 1). The two connectors are keyed and color-coded and must be mated correctly (color-to-color) before they can be engaged. Make sure the connector latch closes properly. Figure 1 2.
8. Turn fan assembly upside down in preparation for mounting fan blade assemblies. 9. Mount blade flanges to fan blades using three M5 x 6 screws per blade (Figure 4). 10. Attach blade assembly to motor hub using two Phillips oval head flange screws assembled in flange. Make sure the screws are tightened securely (Figure 5). Repeat this procedure for other four blade assemblies.
How to Hang Your Ceiling Fan ! WARNING ! The fan must be hung with at least 7' of clearance from floor to blades (Figure 6). WARNING Hanger bracket must seat firmly against outlet box. If the outlet box is recessed, remove wall board until bracket contacts box. If bracket and/or outlet box are not securely attached, the fan could wobble or fall. CEILING 2.
How To Wire Your Ceiling Fan If you feel that you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician. ! WARNING To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. NOTE: If you are not sure if the outlet box is grounded, contact a licensed electrician for advice, as it must be grounded for safe operation. 1.
Using Your Ceiling Fan ! WARNING To reduce the risk of fire or electrical shock, do not use this fan with any solid-state speed control device. 1. Restore electrical power to the outlet box by turning the electricity on at the main fuse box. 2. Check the operation of the fan by gently pulling on the pull chain switch. Your fan model is equipped with a 4-position, 3-speed pull chain switch.
! WARNING: FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER BEFORE TROUBLE SHOOTING YOUR FAN. Trouble Shooting TROUBLE 1. Fan will not start. PROBABLE CAUSE 1. Reversing switch in neutral position. 2. Fuse or circuit breaker blown. 3. Loose power line connections to the fan, or loose switch wire connections in switch housing. 2. Fan sounds noisy. 1. Blades not attached to fan. 2. Loose screws in motor housing. 3. Screws securing fan blade flanges to motor are loose. 4.
Repair Parts 1 2 6 SCREWS (2) SUPPLIED WITH OUTLET BOX 3 5 16 9 7 8 10 12 17 14 15 11 4 13 18 Before discarding packaging material, be certain all parts have been removed. HOW TO ORDER REPAIR PARTS WHEN ORDERING REPAIR PARTS, ALWAYS GIVE THE FOLLOWING INFORMATION: • PART NUMBER • NAME OF ITEM • PART DESCRIPTION • MODEL NUMBER The model number of your Fan will be found on a label attached to the top housing. For repair parts, phone 1-800-654-3545.
Repair Parts Listing 42” Part Number Key No. Model No. CF704ORB03 Model No. CF704WW03 Model No.
Emerson Air Comfort Ceiling Fan Limited Warranty What The Limited Warranty Covers: This limited warranty is offered by Air Comfort Products division of Emerson Electric Co. ("Emerson" "we" or "us") located at the address stated below to the original retail purchaser ("you" or "your") of an Emerson Air Comfort Ceiling Fan product ("Emerson Ceiling Fan") and covers the motor and the other components and accessories of the Emerson Ceiling Fan against all defects in workmanship and materials.
