Owner`s manual

ETL Model No.: CF766

6. Installation of Glass Shade

LIGHT KIT

ASSEMBLY

SOCKET (2)

60-WATT (Max.)

CANDELABRA BASE

LIGHT BULB (2)

Figure 16

GLASS

LIGHT KIT

ASSEMBLY

TIPS (3)

GLASS FLAT

AREA (3)

Figure 17

1. Install two 60-watt (maximum) candelabra base light

bulbs (included) into the light fitter sockets

Figure 16).

2. Place the glass into the opening in the light kit

assembly, aligning the three flat areas on the top

edge of the glass with the three light kit tips on the

light kit assembly and turn the glass bowl clockwise

until it stops (Figure 17).

NOTE: It is advisable to periodically check that the

glass is seated fully clockwise in the light kit

assembly.

Over lamping the fan will result in the light bulbs being

automatically shut off. Use only 60-watt maximum

candelabra light bulbs. Turn off the electricity before

replacing the light bulbs.

WARNING

To avoid possible fire hazard, do not exceed wattage

indicated on the light kit assembly.

WARNING