CF805SAW01 CF805SPB01 CF805SAB01 CF804SAB01
! WARNING WARNING: To avoid fire, shock, and serious personal injury, follow these instructions. Safety Instructions 1. Read your owner’s manual carefully and keep it for future reference. 2. Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally. When the service disconnecting means cannot be locked, securely fasten a warning device, such as a tag, to the service panel. 3.
Unpacking Instructions For your convenience, check-off boxes are provide next to each step. As each step is completed, place a check mark in the box. This will insure that all steps have been completed and will be helpful in finding your place should you be interrupted. 6. One chain coupling WARNING ! 7. Three wire connectors Do not install or use fan if any part is damaged or NOTE: Place the parts from the loose parts bag in missing. Call Toll-Free: a small container to keep them from being lost.
How to Hang Your Ceiling Fan ! 3. Carefully lift the fan motor assembly and engage the slot in the motor bracket with the hook on the mounting plate so that it is securely suspended (Figure 3). Then connect wiring to your fan according to section "HOW TO WIRE YOUR CEILING FAN". WARNING The fan must be hung with at least 7' of clearance from floor to blades (Figure 1).
How To Wire Your Ceiling Fan If you feel that you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician. NOTE: If you are using an Emerson Light Fixture with your fan, see the Light Fixture Owner’s Manual for wiring. 2. Connect the fan motor white wire to the supply white (neutral) wire using a supplied wire connector (Figure 5). 3.
NOTE: Take care not to scratch the fan housing when installing the blade assemblies. Maintenance IMPORTANT CARE INSTRUCTIONS For Your Ceiling Fan Periodic cleaning of your new ceiling fan is the only maintenance that is needed. BLADE When cleaning, use only a soft brush or lint free cloth to avoid scratching the finish. Abrasive cleaning agents are not required and should be avoided to prevent damage to finish. ! CAPTIVE SCREW (2 PER FLANGE) WARNING Do not use water when cleaning your ceiling fan.
! WARNING: FOR YOUR OWN SAFETY TURN OFF POWER AT FUSE BOX OR CIRCUIT BREAKER BEFORE TROUBLE SHOOTING YOUR FAN. Trouble Shooting TROUBLE 1. Fan will not start. PROBABLE CAUSE 1. Reversing switch in neutral position. 2. Fuse or circuit breaker blown. 2. Fan sounds noisy. 3. Loose power line connections to the fan, or loose switch wire connections in switch housing. 1. Blades not attached to fan. 2. Loose screws in motor housing. 3. Screws securing fan blade flanges to motor are loose. 4.
Model No. CF805SPB01 CF805SAB01 CF805SAW01 Model No. Model No. Model No. Model No. Model No.