Instructions / Assembly

Operating Your Ceiling Fan
with the Wall Control
IMPORTANT
Fan installation must be completed, including the
installation of the fan blades, before testing of the
remote control.
Your Dual Slide Fan/Light Wall Control (Figure 23)
has full control of your fan and lights.
1. To set the desired fan speed, push the fan knob up
to operate your fan on low to high speed (1 - 4
settings) (See Figure 23).
2. To turn your fan off, position the knob below the
number 1 setting.
3. To set the level of light brightness, push the light
knob up to operate your light on low to high
settings (See Figure 23).
4. To turn the lights off, position the knob below the
number bottom setting.
4
3
2
1
EMERSON
Figure 23
REVERSE SWITCH
Figure 24
12
U.L. Model No.: CF830
5. All fans are shipped from the factory with the
reversing switch positioned to circulate air
downward. If airflow is desired in opposite
direction, turn your fan OFF and wait for the blades
to stop turning, then slide the reversing switch to
the opposite position, and turn fan on again
(Figure 24).
6. The fan blades will turn in the opposite direction
and reverse the airflow.
Reverse Switch Information
Season Rotation Direction Switch Position
Summer Counter-Clockwise Right
Winter Clockwise Left