READ AND SAVE THESE INSTRUCTIONS ™ LACLEDE 62” Ceiling Fan Owner's Manual Model Numbers CF995BS00 - Brushed Steel CF995VNB00 - Vintage Steel Net Weight: 34.6 Lbs. Questions, problems, missing parts: Before returning to the store call Emerson Electric Customer Service 8 a.m. - 6 p.m., Eastern, Monday-Friday Part No. F40BP74790000 Revision: 131101 1-800-654-3545 www.emersonfans.com Form No. BP7479 ETL Model No.
Table of Contents Section Page Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 1. Unpacking Instructions . . . . . . . . . . . . . . . . . . . . . . . . .3-4 2. Electrical Requirements . . . . . . . . . . . . . . . . . . . . . . . . . .4 3. Ceiling Fan Assembly . . . . . . . . . . . . . . . . . . . . . . . . .5-10 4. How to Hang Your Ceiling Fan . . . . . . . . . . . . . . . . . . .11 5. How to Wire Your Ceiling Fan . . . . . . . . . . . . . . . . . . . . .12 6.
1. Unpacking Instructions ! PACKAGE CONTENTS WARNING Do not install or use fan if any part is damaged or missing. Call Toll-Free for replacement parts: Part A 1-800-654-3545 ! WARNING This product is designed to use only those parts supplied with this product and/or any accessories designated specifically for use with this product by Emerson Electric Co. Substitution of parts or accessories not designated for use with this product by Emerson Electric Co.
1. Unpacking Instructions (continued) This Manual Is Designed to Make it as Easy as Possible for You to Assemble, Install, Operate and Maintain Your Ceiling Fan One Phillips head screwdriver One 1/4” blade screwdriver Wire Size A.W.G. 14 12 Installed Wire Length Up to 50 ft. 50-100 ft. Tools Needed for Assembly One stepladder One wire stripper ! Materials WARNING Before assembling your ceiling fan, refer to section on proper method of wiring your fan (page 12).
3. Ceiling Fan Assembly Please call Emerson technical support at 1-800-654-3545 if you have any questions about installation and operation of this ceiling fan. #10 - 32 x 1/4" WASHER HEAD SCREWS (4 per blade) 3.1 FAN BLADE Mount blade flanges to fan blades using four #10 - 32 x 1/4” washer head blade screws (supplied with fan) (Figure 1). BLADE FLANGE Figure 1 3.
3. Ceiling Fan Assembly (continued) 3.4 LOWER LIGHT FIXTURE Engage the black connector of the lower light fixture with the black motor connector. Engage the white connector of the lower light fixture with the white motor connector. Make sure each connector latches properly (Figure 4). LOWER LIGHT FIXTURE WHITE CONNECTOR MOTOR WHITE CONNECTOR MOTOR BLACK CONNECTOR LOWER LIGHT FIXTURE BLACK CONNECTOR LOWER LGHT ADAPTER Figure 4 3.
3. Ceiling Fan Assembly (continued) 3.7 Remove one #8 - 32 x 5/16” pan head screw from the lower light fixture (reserve for later use). Loosen the other three screws to assemble the lower light cover to the fixture (Figure 6). LOWER LIGHT FIXTURE #8 - 32 x 5/16" PAN HEAD SCREW (3) LOWER LIGHT COVER 3.8 Position the light cover above the fixture and carefully tuck the wires and connectors into the space provided between the cover and fixture as the cover is lowered onto the fixture.
3. Ceiling Fan Assembly (continued) 3.11 Loosen setscrews in motor coupling to permit the downrod to be installed. Separate, untwist and unkink the three 80” motor leads. Route the motor lead wires through the downrod. Align the clevis pin holes in the downrod with the holes in the motor coupling. Install the clevis pin and secure with the hairpin clip (Figure 9). The clevis pin must go through the holes in the motor coupling and the holes in the downrod.
3. Ceiling Fan Assembly (continued) 3.15 PIN Reinstall the hanger ball (Figure 12) on the downrod as follows. Route the motor leads through the downrod. Position the pin through the two holes in the downrod and align the ball so the pin is captured in the groove in the top of the hanger ball. Pull the hanger ball up tight against the pin and securely tighten the setscrew in the hanger ball. A loose setscrew could create fan wobble. HANGER BALL DOWNROD SETSCREW 3.
3. Ceiling Fan Assembly (continued) 3.18 UPPER GLASS Rotate the four glass shade clamps over the inner edge of the glass shade. Be sure to keep the rubber pad beneath each clamp to ensure proper clamping. RUBBER PAD CLAMP SCREW 3.19 Carefully secure the upper glass shade by gently tightening the four clamp screws (Figure 14). GLASS SHADE CLAMP Figure 14 10 ETL Model No.
4. How to Hang Your Ceiling Fan ! CEILING WARNING The fan must be hung with at least 7' of clearance from floor to blades (Figure 15). ! WARNING AT LEAST 7' The outlet box and joist must be securely mounted and capable of supporting at least 50 lbs. Use only a U.L. outlet box listed as “Acceptable for Fan Support of 22.7 kg. (50 lbs.) or less”. ! FLOOR WARNING Figure 15 To reduce the risk of fire, electric shock, or personal injury, mount fan to outlet box marked “Acceptable for Fan Support of 22.
5. How to Wire Your Ceiling Fan If you feel that you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician. ! This product is designed to use only those parts supplied with this product and/or any accessories designated specifically for use with this product by Emerson Electric Co. Substitution of parts or accessories not designated for use with this product by Emerson Electric Co. could result in personal injury or property damage. 5.
6. Installation of Light Bulbs 6.1 13W E26 MEDIUM BASE CFL LIGHT BULB (4) Upper Light Bulb Installation: Install the four (supplied) 13W E26 medium base CFL bulbs into the upper light fixture sockets (Figure 20). UPPER LIGHT SOCKET (4) Figure 20 6.2 Lower Light Bulb Installation: Install the five (supplied) 13W E26 medium base CFL bulbs into the lower light fixture assembly sockets (Figure 21). LOWER LIGHT FIXTURE LOWER LIGHT FIXTURE SOCKETS (5) Figure 21 13W E26 MEDIUM BASE CFL LIGHT BULBS (5) 6.
7. Transmitter and Receiver Instructions 7.1 Code switches in the transmitter may be set in 32 different positions. If your fan and light go on and off without using your control, you may be getting interference from other remote units such as garage door openers, car alarms or security systems. To remedy this situations, simply change the transmitter code per the below section.
8. Programming the Receiver Operating Frequency & High Speed Conditioning of Fan Control 8.1 IMPORTANT: Ceiling fan blades MUST be installed before high speed conditioning can begin. 1. Within 1 minute of restoring electricity to the ceiling fan, push and hold the fan OFF button ( ) for 3 to 5 seconds to set the code in the receiver. The ceiling fan lights (if installed) will blink to indicate the transmitted has been paired with the receiver.
10. Instruction to the User (if device contains a digital device) This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
11. Repair Parts Listing Model Numbers Key No.
13. Accessories 1. Ceiling Fan/Light Controls (see store or catalog). ! 2. Downrod Extension Kits (see store or catalog). This product is designed to use only those parts supplied with this product and/or any accessories designated specifically for use with this product by Emerson Electric Co. Substitution of parts or accessories not designated for use with this product by Emerson Electric Co. could result in personal injury or property damage. 3. Ceiling Fan Light Kits (see store or catalog).
Emerson Air Comfort Ceiling Fan Limited Warranty What The Limited Warranty Covers: This limited warranty is offered by Air Comfort Products division of Emerson Electric Co. ("Emerson" "we" or "us") located at the address stated below to the original retail purchaser ("you" or "your") of an Emerson Air Comfort Ceiling Fan product ("Emerson Ceiling Fan") and covers the motor and the other components and accessories of the Emerson Ceiling Fan against all defects in workmanship and materials.
Air Comfort Products DIVISION OF EMERSON ELECTRIC CO. 8100 W. Florissant • St. Louis, MO 63136 Questions, problems, missing parts: Before returning to the store call Emerson Electric Customer Service 8 a.m. - 6 p.m., Eastern, Monday-Friday 1-800-654-3545 www.emersonfans.com Retain this manual for future use. Part No. F40BP74790000 Revision: 131101 Printed in China 11/13 Form No. BP7479 ETL Model No.
