Data Sheet

Branson manufactures five standard
size transducerized 25 and 40kHz tanks
that range from a 2.5 to a 50 gallon
capacity (10 to 190 liters). All have
drains and fills.
Type 316L bright-annealed stainless
steel construction throughout permits
the use of alkaline, mildly acidic, or
neutral aqueous solutions. Branson
tanks are available with or without
integral heaters. Heated models are
available to maintain solution
temperatures up to 170
o
F (76
o
C). All
models are available with a stainless
steel parts basket and/or tank cover.
STANDARD FEATURES
• Bottom-mounted positive drain
connection.
• Fully shielded internal components.
OPTIONS
• Stainless steel basket for parts
handling.
• Stainless steel tank cover.
• Thermostatically-controlled heat.
NUMBERING SYSTEM
Each Branson transducerized tank has a
model number which contains impor-
tant information to guide the selection
of a properly rated comparison power
supply. When making a selection, note
the frequency.
For example: CH1012-40-12
This model number, stamped on the
tank nameplate, indicates whether
the tank has a heater (H = heated),
the length of the tank in inches, left
to right (10”), the width of the tank
in inches, front to back (12”), the
operating frequency (40kHz), and
the number of attached piezoelectric
transducer elements (12).
POWER SUPPLY SELECTION
To select the correct power supply
for your transducerized tank, add the
total number of transducer elements
involved by using the information
from the model number as explained.
Then, select a power supply whose last
two numbers exactly match the num-
ber of transducer elements by referring
Transducerized Cleaning Tanks
and Immersible Transducers
Ultrasonic Cleaning
Transducerized Cleaning Tanks