026-1011 Rev 0 02-01-07 InSite Quick Start Guide
Computer Process Controls, Inc. 1640 Airport Road Suite #104 Kennesaw, GA 31044 Phone 770-425-2724 Fax 770-425-9319 ALL RIGHTS RESERVED The information contained in this manual has been carefully checked and is believed to be accurate. However, Computer Process Controls, Inc. assumes no responsibility for any inaccuracies that may be contained herein. In no event will Computer Process Controls, Inc.
Table of Contents 1 OVERVIEW ................................................................................................................................................................... 1 2 LAUNCHING INSITE .................................................................................................................................................. 1 3 LOGIN .............................................................................................................................................
1 Overview This manual gives step-by-step instructions to show you how to log in to InSite, set up the navigation tree, user access, and communication information. From the navigation tree you can connect to controllers, set up directory, site, control system, and unit information. 2 4 Click the I Agree button to begin using the application. (First-time users will be presented with the license agreement window.) 4.
Figure 5-1 - Directory Configuration Page Figure 4-1 - InSite Feature Licensing Page For more information on Status definitions, see the Feature Activation and Licensing topic in the InSite online help. Once a directory is created, sites and control systems can be added and will become visible inside the navigation window. These different levels or "nodes" make up the navigation tree structure. 5.2. Add A Site To add a site from the navigation tree: 4.2. Feature Licensing 1.
passwords: NOTE: Click the Refresh button at the top of the navigation window to see any new levels that have been added. The Windows Refresh button on the browser will log the user off. 5.3. 1. Open the Admin Tools drop-down menu. 2. Click InSite Setup > User Manager. 3. Click the Add User button. The User Configuration page opens. 4. Enter the user information into the fields and click Save. A user has been created and is saved to the database.
