user manual

IPMI Controller: IPMI Message Protocol
Katana
®
752i User’s Manual 10006024-04
11-22
The Event Data 0 byte has three fields: Bits 7:6 describe the contents of Event Data 1 (set to
10
2
when an OEM code is present in Event Data 1). Bits 5:4 describe the contents of Event
Data 2 (also set to 10
2
when an OEM code is present). Bits 3:0 store the Sensor-specific Off-
set value for the System Firmware Progress sensor (zero indicates a POST Error). Please see
the IPMI specification for further information on these fields.