Quick Start Manual P/N 3-9000-763, Rev C March 2013 Daniel ™ MeterLink™ Software v1.
Software License Agreement PLEASE READ THIS SOFTWARE LICENSE AGREEMENT (“AGREEMENT”) CAREFULLY BEFORE INSTALLING AND USING THE SOFTWARE. IF YOU DO NOT AGREE WITH THE TERMS OF THE AGREEMENT, YOU ARE NOT PERMITTED TO USE THE SOFTWARE AND MUST RETURN THE SOFTWARE AND INSTALLATION GUIDE TO THE PLACE WHERE YOU OBTAINED IT, IF APPLICABLE. Daniel Measurement and Control, Inc. (“DANIEL”) provides this software (“Program”) and installation guide (collectively, “Daniel MeterLink(TM) product”) for your use.
™ Daniel MeterLink system requirements 1 Daniel MeterLink™ system requirements Installation system requirements Software requirements ® Windows XP Service Pack 2 or later Windows Vista ® ™ Windows 7 (Ultimate, Home Premium and Professional 32- and 64-bit editions) ® Windows 8 ("basic", Pro and Enterprise 32- and 64-bit editions) ™ ® Microsoft Excel 2000 or later version (log file(s) are CSV format if Excel 2000 or later is not available) ® Microsoft XML parser v2.6 or above Internet Explorer 5.
Install Daniel MeterLink 2 Install Daniel MeterLink Software installation Procedure 1. Insert the CD in the appropriate drive. 2. Follow the installation wizard instructions to complete the software installation. 3. Use the tables below for your operating system. Make sure you have administrative rights before proceeding. If you are not sure, continue and the installation program will inform you if you don’t and abort the installation. Consult your system administrator for assistance.
Install Daniel MeterLink Windows® 7 installation ® Install Daniel MeterLink on Windows 7 Start>All Programs>Accessories>Run. Browse to locate the directory for Setup.exe> Click OK. Windows® opens the setup file. Click Next. Click the radio button to accept the License Agreement terms. Click Next and select Setup type (Complete setup is recommended). Click Next and follow the instructions on the screen to complete the installation.
Install a direct connection driver 3 Install a direct connection driver If an Ethernet connection is unavailable, install the standard communications cable between two computers driver or the Daniel Direct Connection driver. ® Configure a direct connection on Windows XP Start>Control Panel > Printers and Other Hardware. Double-click the Phone and Modem Options icon.
Install a direct connection driver ® Configure a direct connection on Windows 7 Start>Control Panel Select Small icons for View by. Note: If you have a touch screen monitor, swipe from the right edge of the monitor to display the Start charm. Click thePhone and Modem icon. The Phone and Modem Options dialog appears. Select the Modems tab. Click Add to start the installation wizard. On the first page of the wizard, select the check box “Don't detect my modem; I will select it from a list”.
™ Configure the Daniel MeterLink meter directory 4 Configure the Daniel MeterLink™ meter directory Create a meter directory If your meter has not previously been configured, Daniel MeterLink will create a meter directory record named “New Meter” with default settings. 1. Open the Meter Directory using the File>Meter Directory menu or use the Meter Directory icon . 2. Create a new record by selecting Insert, Insert Duplicate, or Add from the File pull-down menu. 3.
™ Configure the Daniel MeterLink meter directory Quick Start Manual 7
™ Configure the Daniel MeterLink meter directory 8 Daniel MeterLink
™ Configure the Daniel MeterLink meter directory Quick Start Manual 9
P/N 3-9000-763 Rev C 2013 Daniel Measurement and Control, Inc. 11100 Brittmoore Park Drive Houston, TX 77041 USA T +1 713-467-6000 F +1 713-827-4805 USA Toll Free 1 888-356-9001 Daniel Measurement Services, Inc. T +1 713-827-6413 www.Daniel.com Europe: Stirling, Scotland, UK T +44-1786-433400 Middle East Africa: Dubai, UAE T +971-4-811-8100 Asia Pacific: Singapore T +65-677-8211 This product is a core component of the PlantWeb digital plant architecture. ©2013 Daniel Measurement and Control, Inc.