MLT Analyzer Module Manual

6 - 8
NGA 2000
90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98
• Example:
„ Security code shall be: 53412
„ You have to press the sequence: F5 F3 F4 F1 F2
2) Enable the security code:
• With the ↑↑ -key or the ↓↓ -key you can change to the line:
„ "Basic level security" to enable the code for the "Basic level".
„ "Expert level security" to enable the code for the "Expert level".
„ "System level security" to enable the code for the "System level".
• Press the 88 -key or the →→ -key to select the parameter and adjust "Enabled" with the
↑↑ -key or the ↓↓ -key. Confirm it with the 88 -key.
3) Change to a level locked by security code:
• Go back to the "Main Menu", for instance with F4 (two times).
• Try to change to the locked level via the corresponding menu line with the 88 -key or
the →→ -key:
„ A menu page will appear with the invitation to enter the security code. In the line
"Input" you will find the setup "Ready".
• Enter the security code with the right sequence of function keys:
„ The symbol "∗∗" will appear in the line "Input" for each input.
„ If the code is wrong, "Ready" will appear again in this line. Then you cannot change
to the locked level.
„ If the code is correct, the display will change automatically to the locked level after
the last digit of the code will be entered.
Note:
If you have entered a level by security code, this level will be unlocked generally. If you
want to enter this level only by security code, you have to press the F4 key (Lock...) in the
"Main Menu" after each return from the specific level!
ABCDE1 FGHIK2 LMNOP3 QRSTU4 VWXYZ5
TAG
F1 F2 F3 F4 F5
37.50 ppm
-- Define Basic Level Security PIN --
Press five softkeys in any order to define the PIN.
The actual PIN is represented by the order in which
they are pressed, and shown numerically below.
Press the left arrow key when you are done.
Actual PIN: 12345