MLT Analyzer Module Manual

4.1 Analyzer Channel Status
90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98
NGA 2000
4 - 3
Display Status... Main... Channel Calib...
TAG
F1 F2 F3 F4 F5
Failures: No
Maintenance-Requests: No
Temperature: 20.0 C
Operation: Ready
0.0 100.0
Range: 1
37.50 ppm CH4
0.00 50.00
Measure Channel Back...
TAG
F1 F2 F3 F4 F5
37.50 ppm
-- Analyzer Channel Status --
Status details...
Hours of operations: 164
Operation status: Ready
Events: No
Alarms: No
Maintenance requests: No
Function control/Service: No
Operational settings...
Failures: No
RawMeas
Display Status... Main... Channel Calib...
TAG
F1 F2 F3 F4 F5
Failures: No
Maintenance-Requests: No
Temperature: 20.0 C
Operation: Ready
Range: 1
37.50 ppm CH4
0.00 50.00
0.0 100.0
⇒ ⇒ Change to the
menu "Analyzer
Channel Status"
Press
F2
In the menu "Analyzer
Channel Status" you can
find status informations
of the current channel.
Via the menu lines "Status
details..." and "Operational
settings..." you can change
to further submenus.
(see 4.1.1 p. 4-5...30 and
4.1.2 p. 4-31/32)
⇒ ⇒ Change to the
single component
display
Press
F1
Note:
Via the F2 key you can
change to submenus
containing the primary
and secondary raw
measurements.
⇒ ⇒ Back in the single
component display