Installation manual

Safety Information Product Overview Installation Diagnostics

Options and

Accessories

Specification

The following table applies to the minimum panel width for the EP216 drive.

Figure 8: Mechanical Drawing for All Epsilon EP216 Models (EP216-PDN shown)

To prevent drive from dropping out of position during installation, partially pre-install lower mounting screws,

then set drive in place with lower mounting screws in slots and then install at least one upper mounting screw.

For removal, loosen lower screws, remove upper screws and lift drive out.

Drive Model

Minimum Panel Width

inches [mm]

EP216-B, -I, -IDN, -P, -PDN, -PPB 4.15 (105)

9.60

[243.84]

9.20

[233.68]

3.40

[86.36]

1.03

[26.16]

1.20

[30.48]

5.96

[151.38]

5.23

[132.84]