Owner's Manual

–
45
–
EN
01A11
AUDIO SETTINGS
Choose the appropriate Audio settings for your equip-
ment as it only affect during the playback of DVD
discs.
1 Press the SETUP button twice in STOP mode
so that the DVD SETUP menu appears.
¡ If the menu does not appear, press the PLAY button,
the STOP button, then the SETUP button twice.
2 Press the Arrow button B to select CUS-
TOM, then press the ENTER button.
¡CUSTOM mode will appear.
3 Press the Arrow buttons (s/ B) to select
AUDIO, then press the ENTER button to
confirm.
4 Press the Arrow buttons (K/L) to select the
below items, then press the ENTER buttons.
DRC (Dynamic Range Control):
¡To compress the range of soft to loud sound.
¡The default setting is OFF.
DOLBY DIGITAL:
Set to On when the unit is connected to a Dolby Digital
Decoder.
(ON: Output a Dolby Digital signal)
(OFF: Convert the Dolby Digital to PCM (2 channel
stereo))
¡The default setting is ON.
DOWN SAMPLING:
¡Set to ON when outputting in 48 kHz.
¡The default setting is ON.
When playing disc with copyright Protection
¡If you select OFF, copyright protection will be acti-
vated and sound will be down sampled at 48kHz.
5 Press the SETUP button to exit.
QUICK
AUDIO
DRC OFF
DOLBY DIGITAL ON
DOWN SAMPLING ON
You can change certain aspects of the DVD display
screens and on-screen messages on the TV screen.
1 Press the SETUP button twice in STOP mode
so that the DVD SETUP menu appears.
¡ If the menu does not appear, press the PLAY button,
the STOP button, then the SETUP button twice.
2 Press the Arrow button B to select CUS-
TOM, then press the ENTER button.
¡CUSTOM mode will appear.
3 Press the Arrow button (s/B) to select DIS-
PLAY, then press the ENTER button to confirm.
4 Press the Arrow buttons (K/L) to select the
below items, then press the ENTER button.
TV MODE:
¡Press the Arrow buttons (K/L) for an item selection,
then press the ENTER button.
¡Select 4:3 LETTER BOX for a black bars appears
on top and bottom of the screen.
¡Select 4:3 PAN & SCAN for a full height picture
with both sides trimmed.
¡The default setting is 4:3 LETTER BOX.
ANGLE ICON:
¡Press the ENTER button repeatedly to turn Angle
icon ON or OFF.
¡The default setting is ON.
AUTO POWER OFF:
¡Press the ENTER button repeatedly to turn Auto
Power off ON or OFF.
¡The default setting is ON and it will turn the
TV/DVD/VCR to off automatically after 15 minutes
of no use.
5 Press the SETUP button to exit.
QUICK
DVD-V
DISPLAY SETTING
DISPLAY
TV MODE
4:3 LETTER BOX
ANGLE ICON ON
AUTO POWER OFF ON
QUICK SETUP
TV MODE 4:3 LETTER BOX
DOLBY DIGITAL ON
QUICK SETUP
TV MODE 4:3 LETTER BOX
DOLBY DIGITAL ON
TD853UD/953(P36-52).QX33 03.2.28 10:54 PM Page 45