Instruction manual

Instruction Manual Supplement
D103560X012
DVC6200p Digital Valve Controller
November 2014
11
Device Setup using Siemens SIMATIC PDM Software
Before beginning Device Setup, be sure the instrument is correctly mounted and all pneumatic and electrical
connections are made. Refer to the quick start guide
for general mounting guidelines or the installation instructions
supplied with the mounting kit. Pneumatic and electrical connection information can also be found in the the quick
start guide.
WARNING
Changes to the instrument setup may cause changes in the output pressure or valve travel. Depending on the application,
these changes may upset process control, which may result in personal injury or property damage.
1. Launch the SIMATIC Manager application through the shortcut in the Windows desktop or from the Windows Start
Up Menu. Select File > New, as shown in figure 10 to create the new project. Enter the project name or open an
existing user project and select OK. The project is saved to the SIEMENS program files by default, as shown below;
however you can define the path if a project file is already established.
Figure 10. Create New Project
DEFAULT
STORAGE
LOCATION
PROJECT NAME