Instruction manual

Instruction Manual Supplement
D103560X012
DVC6200p Digital Valve Controller
November 2014
15
6. Enter the Object name (for example, the tag name) and define the PROFIBUS address. Click on Assign Device Type.
Select PA Standalone for standalone station PDM or PA Step7 when PDM is in an integrated environment. Click OK.
Click OK in the resulting screen.
Note
The default address of the DVC6200p is set by the factory to 126. This may need to be changed depending on plant requirements.
Figure 15. Defining the PROFIBUS Address
DEFINES THE EXPECTED PROJECT ADDRESS
IMPORTANT!!
THIS DEFINES THE DESIRED
DEVICE ADDRESS, IT MUST
MATCH THE EXPECTED PROJECT
ADDRESS INDICATED ABOVE