Data Sheet

ManualsBrandsEmerson ManualsPneumatic ActuatorsEmerson Fisher 2052

www.Fisher.com

Fisherr 2052 Diaphragm Rotary Actuator

Fisher 2052 spring-and-diaphragm rotary actuators are

used on rotary-shaft valve bodies for throttling or

on-off applications. The 2052 may be used for

throttling service with a positioner, or it may be used

for on-off service without a positioner. The 2052 has an

ISO 5211 mating interface that allows installation to

non-Fisher valves. Refer to separate bulletins for valve

and positioner information.

Features

n Compact design, smaller actuators-- Ensures

reduced valve/actuator envelope dimensions

leading to greater mounting versatility for both

skids and process plants, where space is at a

premium.

n Compatible with DVC2000, DVC6200, and

DVC6000 digital valve controllers; and 3610J and

3620J positioners-- The new actuator allows

linkage-less feedback, via a contact-less magnetic

array, from the lever to the end-mounted DVC2000.

Integral window mounting of the DVC6200,

DVC6000, 3610J, and 3620J is also available.

n Clamped lever to reduce lost motion-- The clamping

of the lever onto a splined valve shaft, coupled with

the single pivot linkage, reduces lost motion

between the actuator and the valve. The typical

cumulative deadband for a Fisher rotary control

valve assembly results in 0.5% or less variability.

n No bench set required-- The new nested spring

design requires no bench set. This also simplifies the

actuator selection process, see table 3.

n ISO 5211 mounting with optional insert-- The

actuator can now be mounted directly onto

non-spline shafts, such as Square and Double D. This

allows the actuator, with its enhanced control, to

mount on a wider range of valves conforming to ISO

5211.

W9418-2

Fisher Control-Diskt Valve with 2052 Actuator and

FIELDVUE™ DVC6200 Digital Valve Controller

n Adjustable travel stops standard-- Provides the

ability to adjust or change the travel range by 30

degrees in either direction without removing the

actuator or the addition of extra parts.

n Fail-safe mechanism contains no aluminum-- All

parts in the fail-safe mechanism (made of steel, cast

iron, and ductile iron) ensure the actuator will

maintain safety integrity in the event of a fire.

n Powder paint as standard-- The Emerson Process

Managementt powder paint finish offers an

excellent corrosion-resistant finish to all external

steel and cast iron parts.

n NAMUR VDE/VDI 3845 bolt pattern for accessory

mounting-- Meeting the global standard ensures

compatibility for most accessories, enabling quick

and easy mounting.

n Field reversible, right- or left-hand mounting-- The

actuator/valve assembly action can be converted

from push-down-to-open to push-down-to-close, or

vice-versa, without additional parts.

n Declutchable and top-mounted handwheels--

Available for all sizes.

2052 Actuator

D103295X012

Product Bulletin

61.1:2052

November 2014

Summary of content (12 pages)

PAGE 1
Product Bulletin 2052 Actuator 61.1:2052 November 2014 D103295X012 Fisherr 2052 Diaphragm Rotary Actuator Fisher 2052 spring-and-diaphragm rotary actuators are used on rotary-shaft valve bodies for throttling or on-off applications. The 2052 may be used for throttling service with a positioner, or it may be used for on-off service without a positioner. The 2052 has an ISO 5211 mating interface that allows installation to non-Fisher valves.
PAGE 2
Product Bulletin 2052 Actuator 61.1:2052 November 2014 D103295X012 2052 Actuator Specifications and Materials of Construction See tables 1 and 2. Table 1.
PAGE 3
2052 Actuator D103295X012 Options Top-Mounted Handwheel: For infrequent use as a manual actuator (see figure 2). For repeated or daily manual operation, the unit should be equipped with a declutchable handwheel actuator. Declutchable Handwheel Actuator: An end-mounted manual actuator can be used to provide on-site control and to provide override capabilities. See bulletin 61.8:1078 for handwheel actuator specifications.
PAGE 4
Product Bulletin 2052 Actuator 61.1:2052 November 2014 D103295X012 Figure 2. Top-Mounted Handwheel W9484 Table 3. Actuator and Shaft Size Availability SHAFT SIZE 4 ACTUATOR SIZE mm Inches 1 12.7 1/2 X 2 3 14.3 x 15.9 9/16 x 5/8 X X 15.9 5/8 X X 19.1 3/4 X X X 22.2 7/8 X X 25.4 1 X X 28.6 x 31.8 1-1/8 x 1-1/4 X X 31.8 1-1/4 X X 31.8 x 38.1 1-1/4 x 1-1/2 X 38.1 1-1/2 X 39.7 x 44.5 1-9/16 x 1-3/4 X 44.5 1-3/4 X 50.
PAGE 5
Product Bulletin 2052 Actuator 61.1:2052 November 2014 D103295X012 Table 4. Pressure Connections PRESSURE CONNECTION ACTUATOR SIZE 1/4 NPT 1/2 NPT 3/4 NPT G 1/4 1 standard optional not available optional 2 standard optional not available optional 3 not available standard optional not available 4 barg (58 psig)(1) 4.7 barg (68 psig)(1) Table 5.
PAGE 6
Product Bulletin 2052 Actuator 61.1:2052 November 2014 D103295X012 Table 8. Actuator / Valve Body Mounting Dimensions V VALVE SHAFT DIAMETER Size 1 Size 2 mm Inches mm Inches 12.7 1/2 135 5.3 15.9 5/8 135 19.1 3/4 158 25.4 Size 3 mm Inches mm Inches 5.3 148.5 5.8 6.2 171.5 1 171.5 6.8 179 7.0 6.8 179 31.8 1-1/4 169.5 7.0 6.7 177 38.1 1-1/2 177 7.0 7.0 44.5 1-3/4 316 12.4 50.8 2 316 12.4 Table 9.
PAGE 7
Product Bulletin 2052 Actuator 61.1:2052 November 2014 D103295X012 Figure 3.
PAGE 8
Product Bulletin 2052 Actuator 61.1:2052 November 2014 D103295X012 Figure 4. Handwheel Dimensions (also see tables 6 and 9) Jc DIA Hc R E GE38370_1 Figure 5.
PAGE 9
Product Bulletin 2052 Actuator 61.1:2052 November 2014 D103295X012 Figure 6. NAMUR Instrument Mounting Dimensions (also see tables 10 and 11) 45_ 2X M3 4X M5 K 1 N A L J GG06029_B 1 4X B N is the outside diameter of the lever hub. Figure 7.
PAGE 10
Product Bulletin 2052 Actuator 61.1:2052 November 2014 D103295X012 Figure 8. Fisher 2052 Actuator Mounting Styles (also see table 13) LEFT HAND MOUNTING RIGHT HAND MOUNTING VALVE INLET VALVE INLET STYLE D SHOWN STYLE B SHOWN STYLE D STYLE C STYLE A STYLE B POSITION 1 STANDARD POSITION 1 STANDARD FLOW 2 4 4 3 2 2 FLOW 3 4 4 2 3 3 GE37285-B Table 13.
PAGE 11
2052 Actuator D103295X012 Product Bulletin 61.
PAGE 12
Product Bulletin 61.1:2052 November 2014 2052 Actuator D103295X012 Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user.