Instruction Manual

Instruction Manual
D200124X012
2500 and 2503 Controllers/Transmitters
April 2014
38
WARNING
Use only genuine Fisher replacement parts. Components that are not supplied by Emerson Process Management should
not, under any circumstances, be used in any Fisher instrument. Use of components not supplied by Emerson Process
Management may void your warranty, might adversely affect the performance of the instrument, and could cause personal
injury and property damage.
Parts List
Description Part Number
Controller Parts Kits
2500 Controller Repair Kits
Contains keys 12, 15, 21, 24, 38, and
the flapper assembly
Standard temperature R2500X00L32
High temperature R2500X00H32
2503 Controller Repair Kit
Standard temperature only
The kit contains
keys 12, 21, 22, 24, 38, and the
flapper assembly. R2503X00022
Relay Replacement Kit
Contains keys 22, 43, and the relay assembly
Standard temperature RRELAYX0L22
High temperature RRELAYX0H22
Heat Insulator Retrofit Kit
Contains the heat insulator parts shown
in figure 14 and listed under Heat
Insulator in this parts list R2500XH0012
2500 Controller Cover Gasket Kit
Contains qty. 5 cover gaskets, key 21 R2500CVR012
Common Controller/Transmitter
Parts (figure 16)
Note
Part numbers are shown for recommended spares only. For part
numbers not shown, contact your Emerson Process Management sales
office.
Key Description
1 Case back
2 Case cover, aluminum
3 Door handle, pl steel
Key Description
4 Door handle shaft (not shown), brass
5 Machine screw, steel
6 Spring washer, stainless steel
7 Door hook, pl steel
8 Stop nut, pl steel
9 Drive‐lock pin, (2 req'd)
10 Tubing assembly, stainless steel
For all 2500 controllers/transmitters except 2503
For 2503 only
11 Relay tubing, stainless steel
12* Ball bearing assembly, Brass, pl 1C8983000A2
13 Retaining ring, pl steel (2 req'd)
14* Gauge glass (2 req'd) 0T019206042
15* Gauge glass gasket, chloroprene (2 req'd) 0T019104082
16* Bourdon tube assembly,
Brass
2500 and 2500T
3 to 15 psig 32B1231X012
6 to 30 psig 32B1231X022
2500S
0 to 20 psig 32B1233X012
0 to 35 psig 32B1233X022
2503
0 to 20 psig 32B1234X012
0 to 35 psig 32B1234X022
Stainless steel
2500 and 2500T
3 to 15 psig 32B1232X032
6 to 30 psig 32B1232X042
19* Triple scale gauge (2 req'd)
Brass
0 to 30 psig/0 to 0.2 MPa/0 to 2 bar 11B8577X012
0 to 60 psig/0 to 0.4 MPa/0 to 4 bar 11B8577X022
Stainless steel
0 to 30 psig/0 to 0.2 MPa/0 to 2 bar 11B8583X012
0 to 60 psig/0 to 0.4 MPa/0 to 4 bar 11B8583X022
19* Dual scale gauge (2 req'd)
Brass
0 to 30 psig / 0 to 2 kg/cm
2
11B8577X042
0 to 60 psig / 0 to 4 kg/cm
2
11B8577X052
Stainless steel
0 to 30 psig / 0 to 2 kg/cm
2
11B8583X032
*Recommended spare parts