Instruction Manual

Instruction Manual
D200124X012
2500 and 2503 Controllers/Transmitters
April 2014
40
Key Description Part Number
21* Cover gasket, chloroprene 1C919806432
22* Relay gasket
Standard temperature, chloroprene 1C897403012
High temperature, silicon 1N873804142
23 Relay base
24* Relay base gasket (not shown)
Standard temperature, chloroprene 1C897303012
High temperature, silicon 1N873904142
25 Flexure strip, stainless steel,
26 Flexure strip nut, pl steel (2 req'd)
27 Flexure strip base, pl steel
28 Level set arm, pl steel
29 Drivelok pin, pl steel
30 Flapper base, brass, pl
31 Shaft clamp screw, SST (2 req'd for C version only,
1 req'd for all others)
32 Flapper, stainless steel
33 Alignment screw, brass, pl
34 Relay assembly
For all 2500 controllers/transmitters except 2503
Standard temperature
High temperature
Corrosive service
2503 only
Standard temperature
High temperature
35 Level adjustment assembly (controllers only)
35 Zero adjustment assembly (transmitters only)
36 Proportional band adjustment assembly
(except transmitters and 2503 controllers, see key 90)
Standard and high temperature
Corrosive service
37 67CFR regulator
38A* Filter gasket (not shown)
Standard temperature, chloroprene 1C898603012
High temperature, silicon 1N874004142
38B Spacer, aluminum (not shown)
38C* O‐ring (not shown)
Standard temperature, nitrile 1E591406992
High temperature, fluoroelastomer 1E5914X0062
39 Cap screw (not shown), pl steel (2 req'd)
Key Description
40 Hex nut, pl steel
(2 req'd for C versions, 1 req'd for all others)
41 Screw, pl steel (2 req'd for C versions only)
42 Machine screw, pl steel (8 req'd)
43 Machine screw, pl steel (2 req'd)
44 Machine screw, pl steel (6 req'd)
45 Machine Screw, pl steel (2 req'd)
46 Machine Screw, pl steel (4 req'd)
47 Spring (not shown), stainless steel
48 Cap screw, pl steel (4 req'd)
49 Machine screw, pl steel (13 req'd)
50 Screen, N04400
51 Pointer assembly (C versions only),
Stainless steel/brass, pl
52 Washer (C versions only), steel (2 req'd)
53 Base plate (C versions only), aluminum
54 Front plate (C versions only), aluminum
73 Pipe plug (2503 only), brass (not shown)
90 Specific gravity adjustment assembly
Standard and high temperature
Corrosive service
215 Nameplate
Heat Insulator (figure 14)
Note
All Heat Insulator parts are included in the Heat Insulator Parts Kit.
35 Heat Insulator Assembly, stainless steel
36 Shaft Coupling, stainless steel
37 Shaft extension, N05500
38 Set screw, stainless steel (2 req'd)
39 Cap screw, pl steel (4 req'd)
40 Cap screw, pl steel (4 req'd)
53 Washer, carbon steel, pl (4 req'd)
*Recommended spare parts
Emerson Process Management
Marshalltown, Iowa 50158 USA
Sorocaba, 18087 Brazil
Chatham, Kent ME4 4QZ UK
Dubai, United Arab Emirates
Singapore 128461 Singapore
www.Fisher.com
The contents of this publication are presented for informational purposes only, and while every effort has been made to ensure their accuracy, they are not
to be construed as warranties or guarantees, express or implied, regarding the products or services described herein or their use or applicability. All sales are
governed by our terms and conditions, which are available upon request. We reserve the right to modify or improve the designs or specifications of such
products at any time without notice.
E 1977, 2014 Fisher Controls International LLC. All rights reserved.
Fisher is a mark owned by one of the companies in the Emerson Process Management business unit of Emerson Electric Co. Emerson Process Management,
Emerson, and the Emerson logo are trademarks and service marks of Emerson Electric Co. All other marks are the property of their respective owners.
Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance
of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user.