Instruction Manual

www.Fisher.com

INMETRO Hazardous Area Approvals

for

Fisherr 582i Electro‐Pneumatic Converter

and 3582i Positioners

This supplement provides INMETRO Hazardous Area Approval information for the 582i electro‐pneumatic converter

and the 3582i positioner. Use this in conjunction with information provided in the Fisher 3582 and 3582i Positioners,

582i Electro-Pneumatic Converter, and 3583 Valve Stem Position Transmitter instruction manual (D200138X012).

INMETRO—National Institute of Metrology, Quality and Technolog. INMETRO approval is accepted in Brazil.

Certain nameplates may carry more than one approval, and each approval may have unique installation/wiring

requirements and/or conditions of “safe use”. These special instructions for “safe use” are in addition to, and may

override, the standard installation procedures. Refer to the instruction manual

for all other information regarding

3582 and 3582i positioners, 582i electro‐pneumatic converters and 3583 valve stem position transmitters.

Note

This information supplements the nameplate markings affixed to the product.

Always refer to the nameplate itself to identify the appropriate certification.

WARNING

Failure to follow these conditions of “safe use” could result in personal injury or property damage from fire or explosion,

and area re‐classification.

For 582i Converter (also applies to 3582i positioners)

Certificate Number: IEx 14.0240

Standards Used for Certification

ABNT NBR IEC 60079-0:2013

ABNT NBR IEC 60079-1:2009

ABNT NBR IEC 60079-11:2013

ABNT NBR IEC 60079-15:2012

Instruction Manual Supplement

D103636X012

582i and 3582i

November 2014

PAGE 1
Instruction Manual Supplement 582i and 3582i November 2014 D103636X012 INMETRO Hazardous Area Approvals for Fisherr 582i Electro‐Pneumatic Converter and 3582i Positioners This supplement provides INMETRO Hazardous Area Approval information for the 582i electro‐pneumatic converter and the 3582i positioner. Use this in conjunction with information provided in the Fisher 3582 and 3582i Positioners, 582i Electro-Pneumatic Converter, and 3583 Valve Stem Position Transmitter instruction manual (D200138X012).
PAGE 2
582i and 3582i November 2014 Instruction Manual Supplement D103636X012 Intrinsically Safe Ex ia IIC T6/T5/T4 Ga Tamb = -40_C to: +47_C for T6 ; +62_C for T5 ; +71_C for T4 Nominal Characteristics: 30 Vmax, 4-20 mA Ui = 30 V ; Ii = 150 mA ; Pi = 1.