Instruction Manual

ManualsBrandsEmerson ManualsField InstrumentationEmerson Fisher 4195K

101

102

103

104

105

106

107

108

109

110

Instruction Manual

D200160X012

4195K Controllers

December 2012

108

Key Description

62 Remote set pt ass'y (suffix letter M)

Note

The part numbers listed for key 62 are for the complete remote set point

(suffix letter M) ass'y. Individual assembly parts are listed in the Remote

Set Point Assembly subsection of the parts list. Key numbers for

individual ass'y parts also appear in figure 7‐6.

N09902 (Nickel Alloy)

0.8 bar (12 psig) span

1.7 bar (24 psig) span

SST

0.8 bar (12 psig) span

1.7 bar (24 psig) span

64 Machine screw, fill hd, 18-8 SST

4 req'd to attach process and set pt

indicator ass'y (key 56) to frame

65 Feedback link ass'y, aluminum/brass/SST

71 Machine screw, fill hd, 18-8 SST

For all 4195KA, KB, and KS controllers (4 req'd)

For all 4195KC controllers (6 req'd)

72 Blowout plug, silicone

Note

Key numbers 73 through 76 are only for use with a 4195K controller with

a Bourdon tube element. Travel stops are required when the calibration

starting point is greater than 0 psig. Use only when specified.

73 Upper travel stop, G10100 (steel)

Use only when specified. See Note above.

74 Lower travel stop, G10100 (steel)

Use only when specified. See Note above.

75 Machine screw, fill hd, 18-8 SST

Use only when specified. See Note above.

If only upper travel stop installed, none req'd - - -

If both upper and lower travel stop installed,

2 req'd to mount upper travel stop

76 Machine screw, fill hd, 18-8 SST

Use only when specified. See Note above.

If only upper travel stop installed,

2 req'd to mount upper travel stop

If both upper and lower travel stop installed,

2 req'd to mount lower travel stop

120 Machine screw, fill hd, 18-8 SST

2 req'd to attach remote set pt ass'y (suffix

letter M) to indicator ass'y base plate

127 Machine screw, fill hd, 18-8 SST

(4 req'd)

131 Machine screw, fill hd, S30400 (304 SST)

2 req'd to attach rate/reset manifold

(key 136) to frame manifold (key 135)

Key Description Part Number

135 Frame manifold, A03600 (aluminum)

For all types except w/suffix letter E,

auto/manual station

136 Rate/reset manifold, A03600 (aluminum)

For all types except 4195KC controllers

137 Rate tubing ass'y (for 4195KC controllers only)

SST/aluminum

138 Auto/manual tubing ass'y

Use w/suffix letter E, auto/manual station only

SST/aluminum

140 Machine screw, fill hd, 18-8 SST

Used to attach remote set pt ass'y (suffix

letter M) to indicator ass'y (key 56)

162 Machine screw, hex hd, 18-8 SST

Used to attach the reset valve (4195KB)

or rate/reset valve (4195KC) to the frame

For 4195KB and KC controllers only

262 Rate/reset valve ass'y (for 4195KC controllers only)

Brass bellows

0.2 to 1.0 bar (3 to 15 psig)

0.4 to 2.0 bar (6 to 30 psig)

SST bellows

0.2 to 1.0 bar (3 to 15 psig)

0.4 to 2.0 bar (6 to 30 psig)

273 Auto/manual station (suffix letter E)

Note

The part number listed for key 273 is for the complete auto/manual

station (suffix letter E). Individual ass'y parts are listed in the

Auto/Manual Station subsection of the parts list. Key numbers for

individual ass'y parts also appear in figure 7‐7.

310 Lithium grease (not furnished with controller)

311 Anti‐seize sealant (not furnished with controller)

312* O‐ring, nitrile