Instruction Manual

Instruction Manual
D200160X012
4195K Controllers
December 2012
122
Key Description Part Number
298* O‐ring, nitrile 1E222606992
299 Rocker, A96061 (aluminum)
300 Clip, SST
301 Lever spring seat, SST
302 Lever spring, K08500 (pl steel)
303* Groove pin, SST 16A6380X012
304 Switch lever, polycarbonate/SST
305 Switch lever cover plate, aluminum/chromate
306* Closing plate gasket, chloroprene 18A2898X012
307 Closing plate, SST
308 Machine screw, pan hd, 18-8 SST
(2 req'd)
309 Tubing ass'y, SST
310 Lithium grease (not furnished with controller)
311 Anti‐seize sealant (not furnished with controller)
Controller Mounting Parts
Note
Contact your Emerson Process Management sales office for any
additional parts required for controller mounting.
Pipestand Mounting (figure 2‐2)
66 Cap screw, hex hd, pl steel (3 req'd)
67 Lock washer, pl steel (7 req'd)
68 Bracket, pl steel
69 Clamp, pl steel (2 req'd)
Pipestand Mounting with Regulator
(figure 2‐2)
66 Cap screw, hex hd, pl steel (3 req'd)
67 Lock washer, pl steel (7 req'd)
68 Bracket, pl steel
69 Clamp, pl steel (2 req'd)
362 Cap screw, hex hd, pl steel (2 req'd)
363 Lock washer, 18-8 SST (2 req'd)
364 Hex nut, A563 (pl steel) (2 req'd)
365 Tubing fittings (2 req'd) See fittings subsection
Key Description
Panel Mounting (figure 2‐3)
66 Cap screw, hex hd, pl steel (3 req'd)
67 Lock washer, pl steel
(3 req'd)
68 Bracket, A569 (pl steel)
70 Machine Screw, rd hd, pl steel (4 req'd)
Wall Mounting (figure 2‐4)
66 Cap screw, pl steel (3 req'd)
67 Lock washer, pl steel (3 req'd)
68 Bracket, pl steel
Controller Mounting Parts for Actuator With
Casing‐ Mounted Controller
Spacer spool, steel (3 req'd)
Cap screw, hex hd, pl steel (3 req'd)
Lock washer, pl steel (5 req'd)
Mounting bracket, A569 (pl steel)
Cap screw, hex hd, pl steel (2 req'd)
Mounting bracket, G10100 (pl steel)
For 657/667 size 80 & 100
For all other types
Cap screw, hex hd, pl steel (2 req'd)
Hex nut, pl steel (2 req'd)
Washer, pl steel (2 req'd)
Washer, G10100 (pl steel) (2 req'd)
Controller Mounting Parts for Actuator With
Yoke‐ Mounted Controller (figure 2‐1)
Spacer spool, steel (3 req'd)
Cap screw, hex hd, pl steel
(3 req'd)
Lock washer, pl steel (5 req'd)
Mounting bracket, steel
For 1061 w/switches or manual operator
For all other types
Spacer spool, steel (2 req'd)
Cap screw, hex hd, pl steel
(2 req'd)
*Recommended spare parts