Installation Instructions

Instruction Manual
D102087X012
585C Actuator
October 2013
24
Parts List
Note
Part numbers are shown for recommended spares only. For part
numbers not shown, contact your Emerson Process Management sales
office.
Sizes 25 & 50
Common Actuator Parts (figure 4 or 6)
Key Description Part Number
1Cylinder
2 Cylinder-to-Yoke Bolts
3 Piston, aluminum
4 Cap Screw, for actuators without handwheel
5 Travel Stop Spacer, aluminum
6Yoke,ductileiron
7* Yoke O-ring
For size 25
Nitrile 13A5599X062
FKM (fluorocarbon) (for high temperature) 13A5599X022
For size 50
Nitrile 1L315906992
FKM (for high temperature) 1L3159X0012
8* Piston O-ring
For size 25
Nitrile 19A7098X022
FKM (for high temperature) 19A7098X032
For size 50
Nitrile 1F1727X0032
FKM (for high temperature) 1F1727X0012
9* Actuator Stem O-ring
For size 25
Nitrile 1H8498X0022
FKM (for high temperature) 1H8498X0032
For size 50
Nitrile 1E736906992
FKM (for high temperature) 1D2620X0032
10 Actuator Stem, chrome plated steel
11* Piston Stem Bearing, nylon
For size 25 18A0616X012
For size 50 24B6313X012
12 Stem Connector, zn pl steel
13 Stem Connector Nut
14 Cap Screw (2 req'd)
15 Hex Nut
16 Bias Spring, outer (steel) (see table 4-7 for use)
17 Bias Spring, inner (steel) (see table 4-7 for use)
18 Self Tapping Screw (2 req'd)
19 Travel Indicator Scale
Key Description Part Number
20 Drive Screw, stainless steel (7 req'd)
21 Nameplate
22 Warning Tag, stainless steel
23 Hex Nut (2 req'd)
24 Lithium grease
(not furnished with actuator)
25* Back-Up Ring, Size 50 only (use with Nitrile or FKM O-rings)
Nitrile 14B8259X012
71 Warning Nameplate
75 Spacer (2 req'd)
Additional Parts for Actuator with
Handwheel (figure 5 or 7)
1 Cylinder,
35 Neutral Indicator Cover, polycarbonate
36 Handwheel Housing, cast iron
37 Neutral Indicator Plate, polycarbonate
38 Bearing Cover, cast iron
39 Thrust Bearing, chrome steel
40 Anti-rotation Key, Zn pl steel
42 Neutral Indicator, stainless steel
43 Neutral Indicator Plate Screw, pl steel (2 req'd)
45 Handwheel Stem Washer, heat treated
46 Operating Nut
47 Handwheel, cast iron
48 Handwheel Retaining Ring, pl steel
50 Grease Fitting, Cd pl steel
51 Bearing Cover Set Screw, pl steel (3 req'd)
52 Handwheel Jam Nut, steel
53 Button Plug, plastic
56 Handwheel Stem, heat treated ENC 416 stainless steel
57* Cylinder Cover O-Ring, nitrile
For Push Only
Size 25 1D237506992
Size 50 1D885506992
Other, Size 25 and 50 1C4157X0022
58* Handwheel Housing O-Ring, nitrile
For Push Only
Size 25 1D348306992
Size 50 1C628006992
Other, Size 25 and 50 1H624506992
60 Handwheel Stem Cap Screw, Zn pl steel
(4 req'd for size 25), (3 req'd for size 50)
63 Detent Spring
64 Detent Ball, Cr pl steel
65 Locking Key, steel
66 Bypass Valve
67 Bypass Tubing
68 Bypass Tee
69 Piston Stud
70 Thread locking adhesive (medium strength) (not furnished with
actuator)
72 Hex Nut, Slotted
73 Cotter Pin
74 Elbow, Tube
*Recommended spare parts