Data Sheet

ManualsBrandsEmerson ManualsControl ValvesEmerson Fisher 8510

www.Fisher.com

Fisherr 8510 and 8510B Eccentric Disc Control

Valves (EMA)

Fisher 8510 and 8510B eccentric disc valves feature an

eccentrically mounted disc and a PTFE or 316 stainless

steel seal ring. The pressure-assisted seal ring provides

excellent shutoff against pressure applied in either

direction. The 8510B is a multi-class rated valve,

available in NPS 2 through 12, and PN10 through

PN100 compatible (compatibility varies with size and

class, see table 1).

The 8510 is rated for CL150, available in NPS 14

through24,andPN10andPN16compatible

(compatibility varies with size and class, see table 1).

These valves combine with a variety of power and

manual actuators to form reliable, high-performance

control valves suited for many liquid and gas

applications requiring extremely low leakage.

Constructions are available for temperatures up to

538C (1000F).

Unless otherwise noted, all NACE references are to

NACE MR0175-2002.

Features

 Sour Service Capability–Materials are available for

applications involving sour service. These materials

comply with the requirements of NACE

MR0175-2002.

 Excellent Flow Control–The eccentrically mounted

disc design provides an approximately linear flow

characteristic and can be used for on/off or

throttling control applications through 90 degrees

of disc rotation. Optional disc stop on 8510B

provides seal protection.

(continued on page 3)

W4739-2

Eccentric Disc Control Valve with Fisher 1052 Actuator

and 3610J Positioner

Fisher 8510B with Alternate Double D Shaft and

1035/El-O-Matic Actuator

W9264-1

8510/8510B Valve

D100066X012

Product Bulletin

51.6:edisc (EMA)

February 2013

Summary of content (20 pages)

PAGE 1
Product Bulletin 8510/8510B Valve 51.6:edisc (EMA) February 2013 D100066X012 Fisherr 8510 and 8510B Eccentric Disc Control Valves (EMA) Fisher 8510 and 8510B eccentric disc valves feature an eccentrically mounted disc and a PTFE or 316 stainless steel seal ring. The pressure-assisted seal ring provides excellent shutoff against pressure applied in either direction.
PAGE 2
Product Bulletin 8510/8510B Valve 51.
PAGE 3
Product Bulletin 8510/8510B Valve 51.6:edisc (EMA) February 2013 D100066X012 ENVIRO-SEAL Packing System Specifications Available Packing J ENVIRO-SEAL PTFE Packing System J ENVIRO-SEAL Graphite Packing System Maximum Temperature/Pressure Limits(1) Maximum Application Temperature/Pressure Limits to meet EPA Fugitive Emission Standard of 100 ppm(2): For ENVIRO-SEAL PTFE Packing Systems: Up to 232C (450F) at the ASME class rating of the valve.
PAGE 4
Product Bulletin 8510/8510B Valve 51.6:edisc (EMA) February 2013 D100066X012 Construction Features      4 Field-Reversible Valve Action–The actuator/valve assembly action can be converted from push-down-to-open to push-down-to-close, or vice versa, without additional parts. PTFE seal ring with pressure-assisting sealing action (figure 5) are designed to provide shutoff regardless of flow direction.
PAGE 5
Product Bulletin 8510/8510B Valve 51.6:edisc (EMA) February 2013 D100066X012 Figure 1. Typical Fisher 8510B Construction Detail RETAINER CLIP CENTERING HOLE VIEW A SEE VIEW A TAPER KEY SEAL RETAINER SEAL RING DISC SEAL RING ASSEMBLY SPRING BEARING SPACER VALVE BODY PTFE SEAL 41B6064-A 41B6101-A B2303* 316 STAINLESS STEEL SEAL Figure 2.
PAGE 6
Product Bulletin 8510/8510B Valve 51.6:edisc (EMA) February 2013 D100066X012 Figure 3. Construction of Fisher 8510 CENTERING HOLE 48A5626-A B1691-3 Figure 4.
PAGE 7
Product Bulletin 8510/8510B Valve 51.6:edisc (EMA) February 2013 D100066X012 Figure 5.
PAGE 8
Product Bulletin 8510/8510B Valve 51.6:edisc (EMA) February 2013 D100066X012 Table 1. Flow Coefficients and ASME Rating and Flange Compatibility VALVE BODY SIZE, NPS Cv WITH NORMAL FLOW AND DISC WIDE OPEN (90 DEGREES ROTATION) 2 91.
PAGE 9
Product Bulletin 8510/8510B Valve 51.6:edisc (EMA) February 2013 D100066X012 Table 3. Standard Construction Materials Part Material Valve Body(1) 8510: WCC Steel, CG8M (316 stainless steel), M35-1(2), or CN-7M (alloy 20) 8510B: WCC Steel, CF3M (316L SST), M35-1(2), CN7M (alloy 20), 1.0619 steel, or 1.
PAGE 10
Product Bulletin 8510/8510B Valve 51.6:edisc (EMA) February 2013 D100066X012 Table 4.
PAGE 11
Product Bulletin 8510/8510B Valve 51.6:edisc (EMA) February 2013 D100066X012 Figure 6.
PAGE 12
Product Bulletin 8510/8510B Valve 51.6:edisc (EMA) February 2013 D100066X012 Table 6. Maximum Allowable Shutoff Pressure Drops(1) in Bar for Steel Valve Body Material TABLE 4 OR 5 TRIM NUMBER 1(2), 2, 3, 4, NT3 5(2), 6, 7, 8 9(2), 10 11 12 13 14 15 FLOW DIRECTION Forward or reverse MAX ALLOWABLE SHUTOFF P (PER VALVE BODY SIZE, NPS) TEMP. C -29 to 49 66 93 121 149 191 204 8510B 3 4 6 8 10 12 14 16 18 20 24 56.2 56.2 48.5 38.6 28.7 13.8 10.3 64.5 58.5 48.5 38.6 28.7 13.8 10.
PAGE 13
Product Bulletin 8510/8510B Valve 51.6:edisc (EMA) February 2013 D100066X012 Table 7. Maximum Allowable Shutoff Pressure Drops(1) in Psi for Steel Valve Body Material TABLE 4 OR 5 TRIM NUMBER 1(2), 2, 3, 4, NT3 5(2), 6, 7, 8 9(2), 10 11 12 13 14 15 FLOW DIRECTION Forward or reverse MAX ALLOWABLE SHUTOFF P (PER VALVE BODY SIZE, NPS) TEMP.
PAGE 14
Product Bulletin 8510/8510B Valve 51.6:edisc (EMA) February 2013 D100066X012 Table 8. Maximum Allowable Shutoff Pressure Drops(1) in Bar for Stainless Steel Valve Body Material TABLE 4 OR 5 TRIM NUMBER 3, 4, NT3 7 8 11x7.4(3) 12 13 14 FLOW DIRECTION Forward or reverse MAX ALLOWABLE SHUTOFF P (PER VALVE BODY SIZE, NPS) TEMP. C -46 to 49 66 93 121 149 191 204 8510B 3 4 6 8 10 12 14 16 18 20 24 56.2 56.2 48.5 38.6 28.7 13.8 10.3 64.5 58.5 48.5 38.6 28.7 13.8 10.3 53.8 53.8 48.
PAGE 15
Product Bulletin 8510/8510B Valve 51.6:edisc (EMA) February 2013 D100066X012 Table 9. Maximum Allowable Shutoff Pressure Drops(1) in Psi for Stainless Steel Valve Body Material TABLE 4 OR 5 TRIM NUMBER 3, 4, NT3 7 8 11 12 13 14 FLOW DIRECTION Forward or reverse MAX ALLOWABLE SHUTOFF P (PER VALVE BODY SIZE, NPS) TEMP.
PAGE 16
Product Bulletin 8510/8510B Valve 51.6:edisc (EMA) February 2013 D100066X012 Table 10. Maximum Allowable Forward and Reverse Shutoff Pressure Drops(1) for Alloy Valve Body Materials ALLOY VALVE BODY MATERIAL TABLE 5 TRIM NUMBER MAX ALLOWABLE SHUTOFF P (PER VALVE BODY SIZE, NPS) 8510B TEMPERATURE 2 3 4 6 8 10 12 C F Bar Psi Bar Psi Bar Psi Bar Psi Bar Psi Bar Psi Bar Psi -50 to 120 200 300 375 400 450 52.4 40.3 25.2 13.8 10.3 3.4 760 584 365 200 150 50 60.4 45.8 27.5 13.
PAGE 17
Product Bulletin 8510/8510B Valve 51.6:edisc (EMA) February 2013 D100066X012 Material Selection Guidelines Pick the valve body, trim, and other construction materials from tables 3, 4, and 5, according to the recommendations and limitations in tables 6, 7, 8, 9, 10, and 11. Also, make sure that the pressure/temperature limits in the specifications table and tables 1, 2, 6, 7, 8, 9, 10, and 11 are not exceeded. b. Reducing or relief 2. Controlled fluid 3. Specific gravity of controlled fluid 4.
PAGE 18
Product Bulletin 8510/8510B Valve 51.6:edisc (EMA) February 2013 D100066X012 Table 12. Dimensions for Fisher 8510 and 8510B R S (SHAFT DIA) T U W APPROXIMATE WEIGHT(1) 102 119 162 202 103 127 159 217 12.7 15.9 19.1 25.4 117 117 152 152 ----32 32 1/2-13 1/2-13 1/2-13 1/2-13 4.3 5.9 9.1 19 289 289 348 362 244 257 297 311 272 325 384 416 31.8 31.8 38.1 38.
PAGE 19
Product Bulletin 8510/8510B Valve 51.6:edisc (EMA) February 2013 D100066X012 Table 14. Dimensions for Fisher 8510B with Alternate Double D Shaft VALVE SIZE, NPS A B D F G K 2 3 4 6 8 10 12 45 48 54 57 64 71 83 59 78 102 141 191 241 286 --83 83 83 83 89 89 141 168 197 251 317 378 438 138 155 198 238 289 289 348 102 119 162 202 244 257 297 2 3 4 6 8 10 12 1.78 1.88 2.12 2.25 2.50 2.81 3.19 2.31 3.06 4.00 5.56 7.50 9.50 11.25 --3.25 3.25 3.25 3.25 3.50 3.50 5.56 6.62 7.75 9.88 12.50 14.
PAGE 20
Product Bulletin 51.6:edisc (EMA) February 2013 8510/8510B Valve D100066X012 Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user. Fisher and ENVIRO-SEAL are marks owned by one of the companies in the Emerson Process Management business unit of Emerson Electric Co.