Data Sheet

ManualsBrandsEmerson ManualsControl ValvesEmerson Fisher Baumann 51000

www.Fisher.com

Baumannt 51000 High-Pressure,

Low-Flow Control Valve

The Baumann 51000 control v alve is optimally

designed for demanding low-flow, high-pressure

control applications often found in laboratories and

pilot plants. NPS 1/4 or 1/2 valve assemblies are

standard as either investment cast stainless steel or

N10276 nickel alloy. Constructions with other high

nickel alloys are available.

With a small footprint, less than 10 inches tall, and

multiple trim capacity reductions available to meet

changing process requirements, the 51000 is a perfect

fit where space is at a premium and flexibility is a must.

The valve is suited for demanding control of gases,

chemical/dye injection and acid/caustic solutions in

paper production, textiles, specialty chemicals, and

many other industries.

Features

 Compact Size.

 Suitable for sticky fluids and corrosive atmospheres.

 Quick Trim Change Out - Matched trims not

required.

 Investment cast stainless steel body in NPS 1/4 and

1/2, or barstock N10276 Nickel Alloy. Other alloys

available.

 Class VI shutoff with soft seat available.

Up to 207 barg (3000 psig) at 37_C(100_F).

 Rugged bolted bonnet design.

 Wide flow capacity range. Maximum rated Cv

ranges from 0.00013 to 2.5 (0.00011 to 2.16 Kv).

 Corrosion-resistant actuator.

 Available without positioner for fail-open or

fail-close applications.

Baumann 51000 NPS 1/2 Control Valve

with TA6000 Electropneumatic Transducer (I/P)

W9733

51000 NPS 1/4 Control Valve with Baumann 16 Actuator,

and Fisherr 3660 Pneumatic Positioner

W9734

W9066

51000 NPS 1/2 Control Valve with Baumann 16 Actuator,

and FIELDVUEt DVC2000 Digital Valve Controller

51000 Valve

D103339X012

Product Bulletin

52.1:51LF

October 2014

Summary of content (12 pages)

PAGE 1
Product Bulletin 51000 Valve 52.1:51LF October 2014 D103339X012 Baumannt 51000 High-Pressure, Low-Flow Control Valve The Baumann 51000 control valve is optimally designed for demanding low-flow, high-pressure control applications often found in laboratories and pilot plants. NPS 1/4 or 1/2 valve assemblies are standard as either investment cast stainless steel or N10276 nickel alloy. Constructions with other high nickel alloys are available.
PAGE 2
Product Bulletin 51000 Valve 52.1:51LF October 2014 D103339X012 Figure 1. NPS 1/4 and 1/2 (6.35 and 12.7 mm) Soft Seat Cage Design for Cv = 0.00013 to 0.45 Class VI Shutoff (N10276 Nickel Alloy Construction Available) Figure 3. NPS 1/2 (12.7 mm) Integral (Metal) Seating for Cv = 1.0, 1.5, and 2.5 Class IV Shutoff 58 26 27 31 28 32 33 FLOW UP FLOW DOWN E1232 Soft Seat E1230 Figure 2.
PAGE 3
Product Bulletin 51000 Valve 52.1:51LF October 2014 D103339X012 Table 2. Baumann 51000 V-Ring Packing Kit 51607 Figure 4. V-Ring Packing Kit Key Number Quantity 9 1 Description Packing Set 29 2 Flat Washer 3 4 Disc Spring E1233 Table 3. Materials of Construction Key Number Parts Material 1 Valve Body, NPS 1/4 and NPS 1/2 ASTM A351 CF8M or ASTM B575 N10276, 35 HRC Max 2 Seat Cage Gasket Reinforced Graphite See figure 2, table 1 3 Figure 1 ONLY! Soft Seat Cage Assy, (Cv's 0.
PAGE 4
Product Bulletin 51000 Valve 52.1:51LF October 2014 D103339X012 Table 4. Flow Coefficients (ASME/ISA/IEC) Valve Size mm NPS 6.35 12.7 1/4 1/2 12.7 1/2 Orifice Diameter mm 3.97 9.53 in. 0.156 0.375 Plug Tvl mm 12.7 0.5 12.7 CV AT VALVE OPENING - Percent of Plug Travel Trim No. in. 0.5 5 30 40 50 60 16 0.000001 0.000003 0.00001 10 20 0.00002 0.00003 0.00005 0.00006 15 0.000002 0.000006 0.00002 0.00004 0.00006 0.00009 0.00011 14 0.000004 0.000014 0.00004 0.00006 0.
PAGE 5
Product Bulletin 51000 Valve 52.1:51LF October 2014 D103339X012 Baumann 16 Actuator Figure 5. Baumann 16 Actuator Sectional The Baumann 16 actuator is single acting, pneumatic with spring-return action. It is a compact, multi-spring actuator with low operating friction. It can be reversed in the field (air-to-open or air-to-close) without special tools or additional parts. 1/4 NPT OPENING Multiple springs determine the bench set; there is no need for a bench set adjustment.
PAGE 6
Product Bulletin 51000 Valve 52.1:51LF October 2014 D103339X012 Table 9. 51000 Series Valve with Baumann 16 Actuator and Positioner (Metric) PERFORMANCE SPECIFICATIONS 6.35 & 12.7 0.00011 - 0.39 Process Temperature Range -28.9 to 177_C 12.7 0.86, 1.29, 2.16 -28.9 to 232_C Valve Size, mm Kv Range ALLOWABLE PRESSURE DROPS Seat Leakage (per ASME/ FCI 70-2) Class VI Class IV Bench Spring Range Air-to-Open(1) Bench Spring Range Air-to-Close(1) 0.3 - 0.9 bar 207 bar 0.2 - 0.8 bar 207 bar 0.
PAGE 7
Product Bulletin 51000 Valve 52.1:51LF October 2014 D103339X012 Table 13. TA6000 Transducer Functional Specifications BAR PSI kPa OUTPUT RANGE 0.2-1.0 3-15 20-100 SUPPLY PRESSURE(1) 1.5-8.0 20-120 150-800 MINIMUM SPAN 0.4 5 35 Output Change 0.02 0.25 1.7 Supply Change 1.7 25 170 SUPPLY PRESSURE EFFECT ON OUTPUT Impedance (OHMS), 197 INPUT SIGNAL, 4-20 mA ENCLOSURE RATING NEMA 2 AIR CONSUMPTION (per ISA S51.1) SCFH 5.0 / (0.14m3/HR) FLOW RATE (SCFM) 2.5 (4.25m3/HR) @ 1.
PAGE 8
Product Bulletin 51000 Valve 52.1:51LF October 2014 D103339X012 Baumann 16 Actuator with TA6000 Transducer Specifications Figure 7. Baumann 16 Actuator with TA6000 (Top View) See figures 6, 7, and 8. Figure 6. Baumann 16 Actuator (Front View) 177 (6.98) 159 (46.25) 146 (5.75) mm (inch) 60 (2.38) 23 (0.91) A 98 (3.86) E1236 TA6000 TRANSDUCER EB0054 1/2 NPT mm (inch) E1235 Figure 8. TA6000 Electropneumatic Transducer Dimensions 38.6 (1.52) 25.4 (1) 77.5 (3.05) 1/2 NPT 93.2 (3.67) 12.7 (0.
PAGE 9
Product Bulletin 51000 Valve 52.1:51LF October 2014 D103339X012 Figure 9. Dimensional Drawings R185 (R7.30) R300 (R11.80) 126 (4.95) 93 (3.67) 127 (5.01) 125 (4.93) 166 (6.52) 188 (7.41) 205 (8.05) 159 268 (10.54) (46.25) 146 (5.75) 60 (2.38) 3660/3661 POSITIONER 1/2 NPT A 23 (0.91) DVC2000 DIGITAL VALVE CONTROLLER DVC6200 BAUMANN 16 ACTUATOR WITH FIELDVUE DVC2000 POSITIONER BAUMANN 16 ACTUATOR WITH FISHER 3660/3661 POSITIONER mm (inch) E1238-1 Table 16.
PAGE 10
Product Bulletin 51000 Valve 52.1:51LF October 2014 D103339X012 Table 17. Weights, Actuator and Instruments Only ACTUATOR TYPE 16 APPROXIMATE WEIGHT INSTRUMENT kg lbs Actuator without instrument 2.1 4.6 Fisher 3660/3661 Positioner 3.6 8.0 FIELDVUE DVC2000 3.8 8.3 FIELDVUE DVC6010 (Aluminum) 5.8 12.7 FIELDVUE DVC6010 (SST) 10.0 22.0 FIELDVUE DVC6010f 5.0 11.0 TA6000 Electropneumatic Transducer 2.5 5.5 Table 18. Rated Cv Comparison Chart VALVE SIZE NPS 1/2 only 1/4 1/2 1.
PAGE 11
Product Bulletin 51000 Valve 52.1:51LF October 2014 D103339X012 Table 19. Model Numbering System 16 51 Actuator Size 51000 16 51000 Valve Size mm NPS 1 2 6.35 12.7 1/4 1/2 Instrument Valve Body Material Trim No. Cv Kv Fail Option 01 2.5(1) 2.16(1) 0(2) None S CF8M O Open 02 1.5(1) 1.29(1) 1(3) Pneumatic (3-15 psi) C N10276 C Closed 03 1.0(1) 0.86(1) 2(4) I/P Positioner (4-20 mA) 04 0.45 0.39 3(5) I/X Transducer (4-20 mA) 05 0.20 0.17 06 0.10 0.09 07 0.
PAGE 12
Product Bulletin 52.1:51LF October 2014 51000 Valve D103339X012 Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use or maintenance of any product. Responsibility for proper selection, use, and maintenance of any product remains solely with the purchaser and end user. Baumann, Fisher, and FIELDVUE are marks owned by one of the companies in the Emerson Process Management business unit of Emerson Electric Co.