Data Sheet

ManualsBrandsEmerson ManualsControl ValvesEmerson Fisher easy-e ED

www.Fisher.com

Fisherr ED, EAD, and EDR

Sliding-Stem Control Valves

FisherED,EAD,andEDRsingle-port control valves

shown in figures 1, 2, and 3 have balanced valve plugs,

cage guiding, and metal-to-metal seating for all

general applications over a wide range of process

pressure drops and temperatures. These general

purpose, sliding- stem valves are used for either

throttling or on-off control of a wide variety of liquids

and gases.

The Fisher ED product line is available for a wide range

of applications, including sulfide and chloride

stress-cracking environments common to the oil and

gas production industries. To discuss available

constructions, contact your Emerson Process

Management sales office and include the applicable

codes and standards required for these environments.

The easy-e™ Valve Family

ED,EAD,andEDRvalvesarepartoftheversatileeasy-e

family of Fisher industrial control valves. easy-evalves

share the following characteristics:

 Multiple trim material choices

 Trim temperature capability with standard metal

seats to 427_C (800_F)

 FGM gaskets

 Interchangeable, restricted-capacity trims and

full-size trims match variable process flow demands

 Different cage/plug stylesprovideparticularflow

characteristics for highly- specialized applications.

Thestandardcagecomesinthreedifferentflow

characteristics:

 quick-opening

 linear

 equal percentage

W1916-3

FISHER ED CONTROL VALVE

WITH 667 ACTUATOR

 Noise in gaseous service may be attenuated by

using Whisper Trim™ I, Whisper Trim III (figure 9),

and WhisperFlo™ cages (figure 11)

 316 stainless steel packing box parts are standard

(including packing flange, studs, and nuts)

ED Valve

D100017X012

Product Bulletin

51.1:ED

December 2012

Summary of content (24 pages)

PAGE 1
Product Bulletin ED Valve 51.1:ED December 2012 D100017X012 Fisherr ED, EAD, and EDR Sliding-Stem Control Valves Fisher ED, EAD, and EDR single-port control valves shown in figures 1, 2, and 3 have balanced valve plugs, cage guiding, and metal-to-metal seating for all general applications over a wide range of process pressure drops and temperatures. These general purpose, sliding-stem valves are used for either throttling or on-off control of a wide variety of liquids and gases.
PAGE 2
Product Bulletin ED Valve 51.1:ED December 2012 D100017X012 Features  Compliance with the Clean Air Act–Optional ENVIRO-SEAL packing systems (figure 6) provide an improved stem seal to help prevent the loss of process fluid. The ENVIRO-SEAL packing systems feature PTFE, Graphite ULF, or Duplex packing with live-loading for reduced packing maintenance.  Valve Plug Stability– Rugged cage guiding provides high valve plug stability, which reduces vibration and mechanical noise.
PAGE 3
Product Bulletin ED Valve 51.
PAGE 4
Product Bulletin ED Valve 51.
PAGE 5
ED Valve D100017X012 Product Bulletin 51.1:ED December 2012 ENVIRO-SEAL Packing System Specifications Applicable Stem Diameters J 9.5 mm (3/8 inches), J 12.7 (1/2), J 19.1 (3/4), J 25.4 (1), and J 31.
PAGE 6
Product Bulletin ED Valve 51.1:ED December 2012 D100017X012 Figure 1.
PAGE 7
Product Bulletin ED Valve 51.1:ED December 2012 D100017X012 Figure 2. Fisher EAD Sectional Figure 3. Fisher EDR Sectional OPTIONAL LINER W0969-5 W2002-5 Figure 4.
PAGE 8
Product Bulletin ED Valve 51.1:ED December 2012 D100017X012 Table 1. C-seal Shutoff Classification VALVE (PRESSURE RATING) VALVE SIZE NPS PORT DIAMETER mm CAGE STYLE Inches 2-1/2 73 2.875 3 87.3 3.4375 3 73 2.875 4 73 2.875 4 73 111.1 2.875 4.375 Eq. %, Linear, Whisper I, Cav III, 1 stage 136.5 5.375 Whisper III (A3, B3, C3, D3), Cav III, 2 stage 177.8 7 Eq. %, Linear, Whisper I, Cav III, 1 stage 177.8 7 Cav III, 2 stage 8 Eq.
PAGE 9
Product Bulletin ED Valve 51.1:ED December 2012 D100017X012 Table 2.
PAGE 10
Product Bulletin ED Valve 51.1:ED December 2012 D100017X012 Table 3.
PAGE 11
Product Bulletin ED Valve 51.1:ED December 2012 D100017X012 Table 5.
PAGE 12
Product Bulletin ED Valve 51.1:ED December 2012 D100017X012 Figure 6.
PAGE 13
ED Valve D100017X012 Product Bulletin 51.1:ED December 2012 Figure 7.
PAGE 14
Product Bulletin ED Valve 51.1:ED December 2012 D100017X012 Table 6. Materials and Temperature Limits for All Other Parts MATERIAL TEMPERATURE CAPABILITY PART Cast iron valve body Body-to-bonnet bolting.
PAGE 15
Product Bulletin ED Valve 51.1:ED December 2012 D100017X012 Figure 8. Typical Trim Used for All Valves Except NPS 4 and 6 Fisher ED with Whisper Trim III Cage and WhisperFlo Cage FLUID TEMPERATURE, _C 0 200 40 41.
PAGE 16
Product Bulletin ED Valve 51.1:ED December 2012 D100017X012 Figure 9. Whisper Trim III Cage in NPS 6 Fisher ED Valve BONNET SPACER CAGE RETAINER W3332-2 Figure 10.
PAGE 17
Product Bulletin ED Valve 51.1:ED December 2012 D100017X012 Table 7.
PAGE 18
Product Bulletin ED Valve 51.1:ED December 2012 D100017X012 Table 8.
PAGE 19
Product Bulletin ED Valve 51.1:ED December 2012 D100017X012 Table 10. Metal Trim Part Materials for Compatibility with NACE MR0175 / ISO 15156 and MR0103 (Sour Service) Specifications, Environmental Restrictions Apply, Refer to Standard. Contact your Emerson Process Management Sales Office for information on NACE MR0175 / ISO 15156 and NACE MR0103.
PAGE 20
Product Bulletin ED Valve 51.1:ED December 2012 D100017X012 Table 11. Port Diameters, Valve Plug Travel, and Stem and Yoke Boss Diameters VALVE SIZE, NPS ED or EDR PORT DIAMETER EAD Full-Sized Trim RestrictedCapacity Trim 1 --1-1/2 --- STEM AND YOKE BOSS DIAMETERS MAX VALVE PLUG TRAVEL Standard Optional Full-Sized Trim RestrictedCapacity Trim mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch 1-1/2 2 --2-1/2 1 --2 --- 2 ----3 33.3 33.3 47.6 47.6 1.3125 1.3125 1.875 1.
PAGE 21
Product Bulletin ED Valve 51.1:ED December 2012 D100017X012 Figure 12. Typical Trim Used for NACE MR0175 / ISO 15156 and NACE MR0103.
PAGE 22
Product Bulletin ED Valve 51.1:ED December 2012 D100017X012 Table 13. Fisher ED and EDR Dimensions A Pressure Rating, End Connection Style(1) VALVE SIZE, NPS Scrd or SW CL125 FF or 150 RF CL150 RTJ CL250 RF or 300 RF CL300 RTJ BW or CL600 RF 1 1-1/2 2 210 251 286 184 222 254 197 235 267 197 235 267 210 248 282 2-1/2 3 4 6 8 ----------- 276 298 353 451 543 292 311 365 464 556 292 317 368 473 568 1 1-1/2 2 8.25 9.88 11.25 7.25 8.75 10.00 7.75 9.25 10.
PAGE 23
Product Bulletin ED Valve 51.1:ED December 2012 D100017X012 Table 14. Fisher ED and EDR Dimensions D FOR PLAIN BONNET VALVE SIZE, NPS ED EDR Stem Diameter Stem Diameter mm 1 1-1/2 2 2-1/2 3 4 6(1) 6(2) 8 9.5 12.7 19.1 25.4 or 31.8 9.5 12.7 19.
PAGE 24
Product Bulletin ED Valve 51.1:ED December 2012 D100017X012 Table 16. Fisher EAD Dimensions Figure 14. Fisher EAD Dimensions (also see tables 16 and 17) MATCH LINE AA VALVE SIZE, NPS CL150 CL300 CL600 FOR ACTUATOR End Connection Style(1) RF RTJ RF RTJ BW, SW or RF RTJ 105 143 168 197 254 105 144 170 198 256 4.12 5.62 6.62 7.75 10.00 4.12 5.69 6.69 7.81 10.06 mm 1 2 3 4 6 92 127 149 176 225 98 133 156 183 232 98 133 159 184 237 105 141 167 197 244 1 2 3 4 6 3.62 5.00 5.88 6.94 8.