Instruction Manual

Instruction Manual
D100401X012
EZ Valve
June 2014
28
Key Description Part Number
213 Lubricant, anti-seize
214* Anti-Extrusion washer (4 req'd)
For ENVIRO-SEAL packing
PTFE filled (off-white)
For PTFE packing
9.5 mm (3/8-inch) stem 12B6336X022
12.7 mm (1/2-inch) stem 12B6335X022
19.1 mm (3/4-inch) stem 12B6660X012
214* Packing Washer (5 req'd)
For ENVIRO-SEAL packing
PTFE
For Graphite packing and Duplex packing
9.5 mm (3/8-inch) stem 12B6936X012
12.7 mm (1/2-inch) stem 12B6937X012
19.1 mm (3/4-inch) stem 12B6938X012
215* Packing Set (2 req'd)
For ENVIRO-SEAL packing
PTFE-carbon/PTFE
9.5 mm (3/8-inch) stem 12B6663X012
12.7 mm (1/2-inch) stem 12B6667X012
19.1 mm (3/4-inch) stem 12B6671X012
216 Lantern Ring
217 Spring Pack Assembly
218* Lower wiper
For ENVIRO-SEAL packing
PTFE
For PTFE packing
9.5 mm (3/8-inch) stem 1J872106992
12.7 mm (1/2-inch) stem 1J872206992
19.1 mm (3/4-inch) stem 1J872306992
Valve Body
1ValveBody
If you need a valve body as a replacement part, order by
valve size, serial number, and desired material.
2* Valve Plug See following table
3* Seat Ring Retainer (part numbers for the seat ring
retainer/bushing assy are provided in a following table)
NPS1/2,3/4,&1valve
CB7Cu-1 (17-4PH SST) 25A6683X012
CF8M (316 SST) 25A6683X022
M35-1 25A6683X052
NPS 1-1/2 valve
CB7Cu-1 25A6685X012
NPS 1-1/2 valve
CF8M 25A6685X022
M35-1 25A6685X052
NPS 2 valve
CB7Cu-1 25A6687X012
CF8M 25A6687X022
M35-1 25A6687X052
NPS 3 valve
CB7Cu-1 25A6689X012
CF8M 25A6689X022
M35-1 25A6689X052
NPS 4 valve
CB7Cu-1 35A6691X012
CF8M 35A6691X022
M35-1 35A6691X052
Key Description Part Number
7* Stem See following table
8* Pin See following table
9* Seat Ring See following table
10* Bonnet Gasket See following table
12* Spiral Wound Gasket See following table
13* Seat Ring Gasket See following table
15 Cap Screw or Stud Bolt
16 Nut
17 Pipe Plug, for use in valve bodies with drain tapping only
18 Flow Arrow, SST
19 Drive Screw, SST (4 req'd)
25* Shim See following table
26* Bushing See following table
(See additional table for part numbers of
assemblies that include both the seat ring
retainer and the bushing)
27* Valve Plug Guide (for composition seats
only) See following table
28* Disk Retainer, (composition seats only)
6.4 mm (0.25-inch) port diameter
S31600 16A3441X012
N05500 16A3441X042
S41600 16A3441X052
9.5 mm (0.375-inch) port diameter
S31600 16A5706X012
N05500 16A5706X042
S41600 16A5706X052
29* Disk, PTFE (composition seats only)
6.4 mm (0.25-inch) port diameter 13A1226X062
9.5 mm (0.375-inch) port diameter 13A5125X042
12.7 mm (0.5-inch) port diameter 1P696806242
19.1 mm (0.75-inch) port diameter 1P696106242
25.4 mm (1-inch) port diameter 1P696906242
38.1 mm (1.5 inch) port diameter 1U279606242
50.8 mm (2-inch) port diameter 1U279906242
76.2 mm (3-inch) port diameter 1F5653X0012
101.6 mm (4-inch) port diameter 16A3462X012
30* Tip (composition seats only) See following table
31* Pin (composition seats only)
12.7 mm (0.5-inch) port diameter
S31600 and S41600 1B599038992
N05500 1B5990X0032
19.1 mm (0.75-inch) port diameter
S31600 and S41600 1P730438992
N05500 1P7304X0032
25.4 mm (1-inch) and 38.1 mm (1.5 inch)
port diameter
S31600 and S41600 1B599335072
N05500 1B5993X00B2
50.8 mm (2-inch) port diameter
S31600 and S41600 1B599538992
N05500 1B599540032
32 Cap Screw (composition seat only)
33 Nameplate, stainless steel
34 Wire, lead
*Recommended spare parts