Data Sheet

ManualsBrandsEmerson ManualsActuatorsEmerson Fisher M Series

www.Fisher.com

D500239X012

M Series Manual Handwheel Gear Actuators

for Type A11, A31A and A41 Butterfly Valves

M Series handwheel gear actuators (figure 1) are

totally enclosed, weatherproof, worm gear actuators

for reliable manual operation with Type A11, A31A

and A41 High Performance Butterfly Valves. The M

Series actuator consists of a body housing, cover,

worm gear, input shaft, and handwheel. The housing

is grease-packed.

Note

Neither Emerson, Emerson Process

Management, nor any of their affiliated

entities assumes responsibility for the

selection, use and maintenance of any

product. Responsibility for the

selection, use, and maintenance of any

product remains with the purchaser

and end-user.

Features

D Long Service Life—Rugged construction

provides stability and corrosion resistance. The unit

is totally enclosed for weatherproof operation.

D Accurate Valve Disc Positioning—Two

adjustable stops are located in the housing for

correct adjustment of disc position. The actuator is

inherently self-locking, unless subjected to high

vibration.

D Overtravel Capability—Provides for five

degrees of overtravel in both directions for precise

positioning of the valve disc.

Installation

The M Series gear actuator is normally mounted on

a valve at the factory. However, the actuator can be

field-mounted; it can be mounted in any position on

the Type A11 or A31A and it can be mounted in

positions 1 and 3 on the Type A41, as shown in

figure 2. Make clearance considerations before

mounting the actuator to determine the most suitable

mounting position. Dimensions are shown in figure 3.

W4715-1 / IL

Figure 1. M Series Handwheel Gear Actuator

Product Bulletin

22.2:M

November 2007

M Series Actuators

Summary of content (8 pages)

PAGE 1
Product Bulletin 22.2:M November 2007 M Series Actuators M Series Manual Handwheel Gear Actuators for Type A11, A31A and A41 Butterfly Valves M Series handwheel gear actuators (figure 1) are totally enclosed, weatherproof, worm gear actuators for reliable manual operation with Type A11, A31A and A41 High Performance Butterfly Valves. The M Series actuator consists of a body housing, cover, worm gear, input shaft, and handwheel. The housing is grease-packed.
PAGE 2
Product Bulletin 22.2:M November 2007 M Series Actuators Specifications Actuator Sizes See tables 1, 2, and 3 Valve Compatibility J Accepts Type A11 valve square-end shafts from 10.3 to 34.9 mm (0.405 to 1.375 inches), keyed shafts from 38.1 to 44.5 mm (1-1/2 to 1-3/4 inches)(1). J Accepts Type A31A valve keyed shafts from 44.5 to 57.2 mm (1-3/4 to 2-1/4 inches). J Accepts Type A41 valve Double D shafts from 12.7 to 44.5 mm (1/2 to 1-3/4 inches).
PAGE 3
Product Bulletin 22.2:M November 2007 M Series Actuators Table 1. M Series Gear Actuator for A11 (CL600) VALVE SIZE, NPS VALVE SHAFT SIZE, INCHES MAXIMUM RECOMMENDED TORQUE(1) nSm lbSin ACTUATOR SIZE HANDWHEEL DIAMETER, INCHES n lb NUMBER OF TURNS TO CLOSE(3) RIM FORCE(2) MAXIMUM TORQUE RATING OF ACTUATOR NSm LbfSin 3 13/32 113 1,000(4) 1KE 12 80 18 9.5 452 4,000 4 5/8 303 2,690(4) 1KE 12 209 47 9.5 452 4,000 643 5,700 2KE 445 100 9.
PAGE 4
Product Bulletin 22.2:M November 2007 M Series Actuators Table 2.
PAGE 5
Product Bulletin 22.2:M November 2007 M Series Actuators POSITION 1 VALVE BODY FLOW DIRECTION FOR RIGHT-HAND MOUNTING POSITION 2 FLOW DIRECTION FOR LEFT-HAND MOUNTING POSITION 4 30B0668-A A7133 / IL POSITION 3 NOTE: ONLY POSITIONS 1 AND 3 ARE APPLICABLE TO TYPE A41. Figure 2.
PAGE 6
Product Bulletin 22.2:M November 2007 M Series Actuators B2130-1 / IL TYPE A11 VALVES TYPE A31A AND A41 VALVES B2130-1 / IL Figure 3.
PAGE 7
Product Bulletin 22.2:M November 2007 M Series Actuators Table 4. Dimensions for A11 and A31A Compatible Actuators DIMENSIONS ACTUATOR SIZE A B G H Handwheel Diameter 64 92 156 203 79 117 191 305 165 79 114 197 305 314 203 106 140 241 457 25.4 375 235 119 156 273 610 19.1 394 235 127 156 273 457 A11 A31A CL150 A31A CL300 A11 A31A CL150 A31A CL300 C D E F 1KE 146(1) --- --- 105(1) --- --- 15.7 2KE 171 155 --- 130 114 168 127 --- 19.
PAGE 8
Product Bulletin 22.2:M November 2007 M Series Actuators Note Neither Emerson, Emerson Process Management, nor any of their affiliated entities assumes responsibility for the selection, use and maintenance of any product. Responsibility for the selection, use, and maintenance of any product remains with the purchaser and end-user. Fisher is a mark owned by Fisher Controls International LLC, a member of the Emerson Process Management business division of Emerson Electric Co.