User Guide

2-1
ValveLinkt Software
Section 2 Quick Start for ValveLink Solo for FOUNDATION
fieldbus Instruments2
This section contains quick start information for ValveLink Solo connected to a single FOUNDATION
fieldbus instrument. For more information about connecting to a single instrument, or for
information about connecting to an H1 segment, see the ValveLink software Installation Guide.
For more information on using ValveLink Solo see ValveLink software help. For information on
using ValveLink software toolbar buttons, see section 6 of this document. Section 7 provides
information on ValveLink software help.
Communicating with FOUNDATION fieldbus instruments requires National Instruments NI-FBUS
hardware and software be installed on the computer running ValveLink Solo.
Note
This section assumes ValveLink Solo and the
associated National Instruments hardware and software
are installed. The ValveLink Software Installation
Guide, found on the ValveLink software installation CD,
provides information for installing these components.