User Guide

2-5
ValveLinkt Software
Figure 2-6. ValveLink Link Master Starting Window
If you are not connected to a segment where a Link Active Scheduler is running, ValveLink
Solo starts the Communications Manager in the LAS mode as indicated in the window shown
in figure 2-6.
Step 4: Click OK to continue the initializing process.
After ValveLink Link Master Starting window disappears, the NI-FBUS startup window again
appears temporarily to complete the initializing process. The last window states that NI-FBUS
software is running and cautions you not to kill the process or the process will not be
complete, as shown in figure 2-7.
Figure 2-7. ValveLink Link Master NI-FBUS Running Window