User Guide

2-13
ValveLinkt Software
Step 8: Restart ValveLink Software and Log In as a New User
Figure 2-18. Logging In
Click the Log In button.
Figure 2-19. OK for Login Button
Enter your user name and password. Click OK.
Step 9: After NI-FBUS completes start up, double click the
instrument icon to open its tag for the status monitor.
If a appears over the instrument symbol ValveLink Solo is not connected to the
instrument. A possible reason for not connecting may be that the instrument is at a
temporary address. ValveLink Solo will not connect to an instrument at a temporary address.
If the instrument is at a temporary address, the Temporary Address window shown in figure
2-20 appears when you attempt to open the instrument tag. To change the device tag and
address, click the Change Address button.
On the Change Device Tag and Address window, shown in figure 2-21, enter a working
address for the device. Address 35 is